In the present work, biobased protic ionic liquid crystal bis(2-hydroxyethyl) ammonium palmitate (DPA) has been studied as neat lubricant under linear reciprocating sliding at 75 °C, in crystalline region, and 110 above its melting point. Three different tribopairs have using AISI 52100 steel, 316L stainless steel sapphire balls against disks. Tribological results °C are agreement with pairs co...

Metallic composite coatings with ceramic particles can be used to improve the mechanical and corrosion properties of steel. In the present research, Ni-ZrO2-TiO2 composite coating was fabricated on AISI 430 stainless steel through the electrodeposition method. The effect of the current density of electroplating (15, 17, 20, and 23 mA.cm-2)was investigated on the...

INVESTIGATING THE EFFECT OF WELDING PASTE CONTAINING GRAPHENE NANOSHEETS ON BONDING PROPERTIES WELDED AISI 304 STAINLESS STEEL PRODUCED BY FLUX-CORED ARC

To measure the cleanability of stainless steel surfaces under standardized conditions, a test stand was set up. Three stainless steel plates (size 200 x 100 mm) can be fixed to the test stand and sprayed with a water jet from a low-pressure nozzle for a period of several minutes. The plates were previously soiled with a starch or protein film with a pre-defined layer thickness and dried for sev...

This work reports on the influence of β-lactoglobuline (β-LGB) and of its denaturation on the adherence of quartz particles, taken as a model of particulate soil, on stainless steel AISI 304 with mirror finish. The substrate was soiled with quartz suspensions in water or in β-LGB solutions as such or previously heated at 75°C, and dried at room temperature or in an oven at 75°C. Cleanability wa...

Original scientific paper Stress measurement by using ultrasonic waves is based on acoustoelasticity law, i. e. the relation between stress and wave velocity in engineering materials. Longitudinal critically refracted (LCR) wave is a popular ultrasonic wave in the ultrasonic stress measurement application. The LCR wave is a bulk longitudinal wave that travels within an effective depth underneat...

The influences of austenitizing conditions on the microstructure of AISI M42 high-speed steel were investigated through thermodynamic calculation, microstructural analysis, and in-situ observation by a confocal scanning laser microscope (CSLM). Results show that the network morphology of carbides could not dissolve completely and distribute equably in the case of the austenitizing temperature i...

aisi 304l austenitic stainless steel with different grain sizes of 0.5 -12 μm was obtained through the martensiticprocess. corrosion behavior of different samples was investigated in a 0.5m hcl solution using open circuitpotential, potentiodynamic polarization and electrochemical impedance spectroscopy tests. also, the correlationbetween the grain size and pitting corrosion resistance was asses...