Introduction: Discharge of textile wastewater causes the reduction of sunlight penetration, interferes with the receiving waters ecology and damage the environment. The aim of this study was to determine the removal efficiency of reactive blue 19 dye from aqueous solutions by cuttlefish bone powder. Materials & Methods: This study was performed experimentally and in laboratory scale. In thi...

The present study analyses the potential of acid treated chitosan for simultaneous co-adsorptive removal of phenol and cyanide from a binary waste water solution. The effects of parameters like pH, temperature, initial concentration, adsorbent dose, and adsorbent size were studied. At an optimum pH of 8, temperature of 300C, initial phenol and cyanide concentration of 200 mg/L and 20 mg/L respe...

The performance of activated sludge in the removal of tetradecyl benzyl dimethyl ammonium chloride (C14BDMA) by adsorption from aqueous solution was investigated with different PH, contact time, ionic strength and temperature. Equilibrium was achieved within 2 h of contact time. The adsorption capacity increased largely with increasing solution pH and remained constant above pH 9. The ionic str...

Emerging contaminants in the environment have caused enormous concern in the last few decades, and among them, antibiotics have received special attention. On the other hand, adsorption has shown to be a useful, low-cost, and eco-friendly method for the removal of this type of contaminants from water. This work is focused on the study of ciprofloxacin (CPX) removal from water by adsorption on p...

The activated carbon produced from olive stones was chemically activated using sulfuric acid, (OS-S), and utilized as an adsorbent for the removal of Cr(VI) from aqueous solution in the concentration range 4-50 mg/L. Adsorption experiments were carried out in a batch process and various experimental parameters such as effect of contact time, initial chromium ion concentration, carbon dosage, an...

This study was focused on nettle ash as an alternative adsorbent for the removal of nickel (II) and cadmium (II) from wastewater. Batch experiments were conducted to determine the factors affecting adsorption of nickel (II) and cadmium (II). The adsorption process is affected by various parameters such as contact time, solution pH and adsorbent dose. The optimum pH required for maximum adsorpti...

In this study, the removal of mercury ions by cellulose of Acetobacter xylinum was investigated in the synthetic and chlor-alkali wastewater. Biofilms of Acetobacter xylinum were grown in laboratory column bioreactors. The biofilms were continuously treated with sterile synthetic model wastewater or nonsterile, neutralized chloralkali wastewater.The extent of adsorption was studied as function ...

This paper presents data for the synthesis and characterization of layer double hydroxides (LDH) and their use for color and chemical oxygen demand (COD) removal from effluents generated by a textile industry. Adsorption studies with raw and biologically treated (activated sludge) textile effluent showed that the pseudo-second order model best fitted the experimental data, leading to adsorption...

Cr(VI) is considered to be potentially carcinogenic to humans. Removal of Cr(VI) ions from aqueous solution under different conditions was investigated using activated alumina (AA) and activated charcoal (AC) as adsorbents. Batch mode experiments were conducted to study the effects of adsorbent dose, contact time, pH, temperature and initial concentration of Cr(VI). Results showed that the adso...