Phenolic resin-derived activated carbon (AC) cloths are used as electrodes for large scale electric double-layer capacitors (EDLCs) or supercapacitors. To increase the energy and power density of the supercapacitor, the contact resistance between the carbon cloth and the aluminum foil current collector is reduced by modifying the Al current collectors. Different modified Al current collectors, ...

In this paper, a fully polymeric micro-cantilever with the surface passivation layer of parylene-C and the strain resistor of poly(3,4-ethylenedioxythiophene)/poly (styrene sulfonate) (PEDOT/PSS) was proposed and demonstrated for immunoassays. By optimizing the design and fabrication of the polymeric micro-cantilever, a square resistance of 220 Ω/□ for PEDOT/PSS conductive layer have been obtai...

Conducting polymers can be easily obtained by electrochemical oxidation of aromatic monomers on an electrode surface as a film state. To prepare conducting polymer fibres by electropolymerization, templates such as porous membranes are necessary in the conventional methods. Here we report the electropolymerization of 3,4-ethylenedioxythiophene and its derivatives by alternating current (AC)-bip...

Screen printed carbon electrode (SPCE) has been modified with single wall carbon nanotube/poly(3,4-ethylenedioxythiophene) (SWCNT/PEDOT) composites for the determination of phenol and chlorophenols (phenol, 4-chlorophenol, 2,4-dichlorophenol, and 2,4,6-trichlorophenol). The effect of the modifiers on the electrode characteristics was evaluated and the responses were optimized for the voltammetr...

Organic neuromorphic devices mimic signal processing features of biological synapses, with short-term plasticity, STP, modulated by the frequency input voltage pulses. Here, an artificial synapse, made intracortical microelectrodes, is demonstrated that exhibits either depressive or facilitative STP. The crossover between two STP regimes controlled voltage. are described equivalent circuit wher...

In this study, we fabricated a planar Si/PEDOT: PSS heterojunction solar cell using three different solvents—ethylene glycol, acetonitrile, and dimethyl sulfoxide—to find the best one. The samples were characterized by diffuse reflectance spectroscopy, scanning electron microscopy, X-ray diffraction, current–voltage. Diffused spectrum analysis showed reduced compared to bare silicon wafers. abs...

We present a reproducible fast prototyping procedure based on micro-drilling to produce homogeneous tubular ultramicroelectrode arrays made from poly(3,4-ethylenedioxythiophene) (PEDOT), a conductive polymer. Arrays of Ø 100 µm tubular electrodes each having a height of 0.37 ± 0.06 µm were reproducibly fabricated. The electrode dimensions were analyzed by SEM after deposition of silver dendrite...

Electronically conductive and electrochemically active 3D-scaffolds based on electrospun poly(ethylene terephthalate) (PET) nano-fibers are reported. Vapour phase polymerization was employed to achieve an uniform and conformal coating of poly(3,4-ethylenedioxythiophone) doped with tosylate (PEDOT:tosylate) on the nano-fibers. The PEDOT coatings had a large impact on the wettability, turning the...

A single-layer graphene film was grown on copper foil by chemical vapor deposition and transferred onto a silicon-pillar-array (SPA) substrate to make a Schottky junction solar cell. The SPA substrate was specifically designed to suppress reflectance and enhance light absorption. The energy conversion efficiency of the prepared graphene/SPA solar cells achieved a maximum of 2.90% with a junctio...

Silver nanowires (AgNWs) networks are promising candidates for the replacement of indium tin oxide (ITO). However, the surface roughness of the AgNWs network is still too high for its application in optoelectronic devices. In this work, we have reduced the surface roughness of the AgNWs networks to 6.4 nm, compared to 33.9 nm of the as-deposited AgNWs network through the hot-pressing process, t...