نتایج جستجو برای: آلیاژ تیتانیم ti6al4v
تعداد نتایج: 5606 فیلتر نتایج به سال:
Ti6Al4V alloy is highly used in the automotive and aerospace industry due to its good machining characteristics. Micro EDM drilling is commonly used to drill micro hole on extremely hard material with very high depth to diameter ratio. In this study, the parameters of micro-electrical discharge machining (EDM) in drilling of Ti6Al4V alloy is optimized for higher machining accuracy with less hol...
By means of plasma polymerization, positively charged, nanometre-thin coatings can be applied to implant surfaces. The aim of the present study was to quantify the adhesion of human bone cells in vitro and to evaluate the bone ongrowth in vivo, on titanium surfaces modified by plasma polymer coatings. Different implant surface configurations were examined: titanium alloy (Ti6Al4V) coated with p...
The aim of this study was to evaluate the bone response to commercially pure titanium grade I and titanium alloy grade V (90% Ti, 6% Al, and 4% V, depicted Ti6Al4V) after 8 weeks in rabbit tibia. Interference microscopy and scanning electron microscopy were used for surface analyses. Transmission electron microscopy (TEM) was used for evaluation of surface crystallinity and chemistry after prep...
In the most recent decades the introduction of unconventional machining processes allowed the development of micromachining techniques. In this work, the influence of material microstructures on the micromilling process was investigated. Ti6Al4V alloy was selected as workpiece material since it is a very common material for micro applications and because its duplex microstructure can be easily ...
Ti6Al4V alloys are widely used in chemical plants, automobile, aerospace industries and medical applications (bone, dental) because of its high specific strength. But, it has poor wear resistance. In the present investigation, duplex coatings were employed to enhance the mechanical and tribological properties. WC-Co Ceramic coatings were deposited on Ti6Al4V substrate with different thicknesses...
A simple method for the functionalization of a common implant material (Ti6Al4V) with biodegradable, drug loaded chitosan-tripolyphosphate (CS-TPP) nanoparticles is developed in order to enhance the osseointegration of endoprostheses after revision operations. The chitosan used has a tailored degree of acetylation which allows for a fast biodegradation by lysozyme. The degradability of chitosan...
در این پژوهش از لایه نشانی الکتروفورتیک برای ایجاد پوشش های مرتبه ای از نانوذرات ha/tio2 بر روی زیرلایه آلیاژ ti-6al-4v استفاده شد. ساختار مرتبه ای پوشش به وسیله افزودن ذرات هیدروکسی آپاتیت به سوسپانسیون لایه نشانی حاوی ذرات tio2، به مدت زمان 3 دقیقه در ولتاژ v 20 ایجاد شد. برای بررسی ساختار فازی لایه پوشش، قبل و بعد از عملیات تف جوشی از آزمون پراش اشعه ایکس (xrd)، استفاده شد. ریزساختار و ترکی...
در این تحقیق، منحنیهای dta و tga پودر هیدراید تیتانیم در هوا با سرعت گرمادهی 5، 10، 20، 25 و 30 درجه بر دقیقه رسم شد و الگوهای xrd پودر در حین گرمایش پودر با سرعت گرمادهی 10 درجه سانتیگراد بر دقیقه در دماهای مختلف تهیه شد. نتایج نشان داد که خروج هیدروژن از هیدراید تیتانیم طی هفت مرحله رخ میدهد و با افزایش سرعت گرمادهی مکانیزم خروج هیدروژن از هیدراید تیتانیم تقریباً ثابت است. با محاسبه انرژی ...
پوشش دی اکسید تیتانیم با استفاده از روش اکسیداسیون پلاسمای الکترولیتی در یک مرحله و طی زمان کوتاهی (ده دقیقه) روی سطح تیتانیم خالص تجاری اعمال شده است. در این پژوهش رفتار خوردگی تیتانیم خالص تجاری و نمونه پوشش داده شده با این روش در محیط اسید سولفوریک مورد بررسی قرار گرفته است. ترکیب فازی و ریخت شناسی سطحی پوشش ایجاد شده به ترتیب توسط پراش سنجی پرتوی ایکس[1] و میکروسکوپ الکترونی روبشی[2]مورد بر...
در این پژوهش، تأثیر عنصر آلیاژی تیتانیم بر رفتار خستگی فولاد هادفیلد مورد بررسی قرار گرفت. برای این کار، ابتدا 3 نمونه از فولاد هادفیلد ( بدون تیتانیم، Ti%5/0 و Ti%1 ) توسط کوره القایی بدون هسته تهیه شد. سپس هر 3 نمونه تحت عملیات حرارتی آنیل در دمای °C1100 به مدت 2 ساعت قرار گرفتند. برای بررسی ریزساختار نمونهها از متالوگرافی و برای بررسی سختی نمونهها از سختیسنجی به روش ویکرز استفاده شد. برا...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید