OBJECTIVES The aim of this study was to evaluate the effect of mechanical cycling on the biaxial flexural strength of two densely sintered ceramic materials. METHODS Disc shaped zirconia (In-Ceram Zirconia) and high alumina (Procera AllCeram) ceramic specimens (diameter: 15 mm and thickness: 1.2 mm) were fabricated according to the manufacturers' instructions. The specimens from each ceramic ...

Chipping of the ceramic veneer is reported as a frequent occurrence when using zirconia-based fixed dental prostheses (FDPs). One possible cause of this complication is the inadequate support of the veneering ceramic by the zirconia substructure. In this article, early clinical observations from patients treated with 96 zirconia-based ceramic single- and multiple-unit FDPs on natural teeth and ...

purpose: the aim of this study was to evaluate the effect of two gingival finishing lines (90° shoulder and deep chamfer) on the marginal fitness of two types of full anatomic all-ceramic crowns; zirconia crowns (zikonzhan) and glass ceramic crowns (ips e-max cad) milled with cad/cam system. materials and methods: two dentoform teeth of left maxillary first molar were prepared with chamfer fini...

STATEMENT OF PROBLEM Evidence is limited on the efficacy of zirconia-based fixed dental prostheses. OBJECTIVE To carry out a literature review of the behavior of zirconium oxide dental restorations. MATERIAL AND METHODS This literature review searched the Pubmed, Scopus, Medline and Cochrane Library databases using key search words "zirconium oxide," "zirconia," "non-metal restorations," "c...

PURPOSE The aim of this study was to evaluate the effect of thickness of zirconia on curing efficiency of resin cements. MATERIALS AND METHODS Four discs with 4.0 mm in diameter were prepared from non-HIP translucent zirconia blocks using a CAD/CAM system and feldspathic ceramic was layered onto discs. Thus, 4 ceramic disc samples were fabricated: (G) 0.5 mm zirconia- as a control group, (G1)...

objective: zirconia cores have limited light transmittance and data are scarce on light transmission through zirconia cores with and without the veneering ceramic.   methods: in this in vitro study, disc-shaped specimens (11.5 mm in diameter and 0.4 (0.05) mm in thickness) were fabricated of three types of zirconia namely mamut, heany and zirkonzahn (n=5). a disc-shaped specimen (11.5 mm in dia...

PURPOSE This study was to evaluate the marginal fit of two CAD-CAM anatomic contour zirconia crown systems compared to lithium disilicate glass-ceramic crowns. MATERIALS AND METHODS Shoulder and deep chamfer margin were formed on each acrylic resin tooth model of a maxillary first premolar. Two CAD-CAM systems (Prettau®Zirconia and ZENOSTAR®ZR translucent) and lithium disilicate glass ceramic...

Cast metal post-core systems have a long history of successful use because of their superior physical properties. However, their high elastic modulus can cause stress concentrations within the surrounding radicular dentin, resulting in root fractures. Moreover, the increasing demand for more esthetically appealing and biocompatible restorations has led to the development of tooth-colored, trans...

The rehabilitation of patients requiring an esthetic smile demands a multidisciplinary approach. This clinical report describes a treatment plan for recovery aesthetics' smile of anterior teeth using ceramic prosthesis with zirconia structure. Initially, a review of aesthetic parameters, diagnostic waxing, mock-up and provisional restorations was performed. A contextual assessment of aesthetic,...

OBJECTIVES This study evaluated the clinical outcome of all-ceramic resin-bonded fixed partial dentures (RBFPDs) with a cantilevered single-retainer design. METHODS Thirty anterior zirconia ceramic RBFPDs were inserted using either a phosphate monomer containing resin (Panavia 21 TC; N=16) or an adhesive bonding system with a phosphoric acid acrylate primer (Multilink-Automix with Metal/Zirco...