In this study, small fraction of NiTi (5 wt%) was added to Yttria stabilized zirconia (YSZ) top coat to improve it sliding wear resistance. The measurement of width of wear tracks after wear tests under a 15 N load for 100 m sliding distances showed that the width of wear track in NiTi-YSZ coating is shorter than that in YSZ coating which depicts the higher wear resistance of NiTi-YSZ coa...

Yttria-stabilized zirconia (YSZ)-based thermal barrier coating (TBC) has been integrated with thermographic phosphors through air plasma spray (APS) for in-depth; non-contact temperature sensing. This coating consisted of a thin layer of Dy-doped YSZ (about 40 µm) on the bottom and a regular YSZ layer with a thickness up to 300 µm on top. A measurement system has been established; which include...

Firstly, the yttria-stabilized zirconia (YSZ) coating and gadolinium zirconate (GZO) with quasi-columnar structure were manufactured by plasma spray physical vapor deposition. At same time, a novel three-dimensional geometrical model was established that could satisfactorily reflect such structural characteristics. Then, based on this model, spatial distribution of pores porosity coatings therm...

The purpose of this paper is to examine the piston stress distribution using several thicknesses of the coating materials to achieve higher gasoline engine performance. First of all, finite element structure analysis is used to uncoated petrol piston made of aluminum alloy. Then, steel and cast iron piston materials are conducted and compared with the aluminum piston. After that, investigation ...

Modern gas turbine hot sections need to be protected from elevated temperature and damaging environments. This protection starts as a typically two layer coating system, the base layer or bond coat (BC) acts as a corrosion barrier and a kind of buffer for the thermal mismatch between the base material and the second top thermally protective layer or Thermal Barrier Coating (TBC). The BC is norm...

Crystalline yttria-stabilized zirconia (YSZ) gate dielectrics have been successfully fabricated on silicon wafers. By carefully controlling the annealing condition, the crystalline YSZ gate dielectrics show promising performances following the rapid thermal annealing process. The equivalent electrical oxide thickness only increases about 2.0 Å after annealing in O2 gas, while the leakage curren...

The paper discusses optimising work on a method of processing ceramic / metal composite coatings for various applications and is based on preliminary work on processing anodes for solid oxide fuel cells (SOFCs). The composite coating is manufactured by the electroless co-deposition of nickel and yttria stabilised zirconia (YSZ) simultaneously on to a ceramic substrate. The effect on coating cha...

The change in conductivity of Fe and Ti implanted if-sputtered layers of yttria-stabilized zirconia (YSZ) was studied as a function of the temperature (400-800 °C) and oxygen partial pressure. In an oxidized state and in the temperature range of 400600 ° C, the conductivity of the Fe implanted YSZ film ( 15 keV, 8 × 10 '6 at.cm 2) was dominated by the n-type electronic conductivity of a thin Fe...

Gadolinium zirconate (GZ) is an attractive material for thermal barrier coatings (TBCs). However, a single layer GZ coating has poor cycling life compared to Yttria Stabilized Zirconia (YSZ). In this study, Solution Precursor High Velocity Oxy-Fuel (SP-HVOF) spray was used produce double GZ/YSZ TBC and the performance with YSZ TBC. The temperature behaviour of solution precursor studied, splat ...