In this study, microalloyed steels were joined by using the submerged arc welding method at different welding currents of 350 A, 400 A and 450 A. The effects of selected welding parameters on the microstructure and mechanical properties of welded materials were investigated. Tensile tests and microhardness measurements were performed. Microstructural changes have been identified in the welding ...

For hot extrusions of magnesium alloy sheets, Dissimilar AZ80 and AZ31 were used, in which AZ80 was placed on advancing side and AZ31 on retreating side, using friction stir butt welding with different process parameters. Some defect-free welded joints with good weld surfaces could be obtained with some suitable welding conditions. The maximum tensile strength of welded joint which is 225.5 MPa...

In the present study, the microstructure of welded zone of Hastelloy X sheets with thickness of 1 mm via pulsed Nd-YAG laser welding were studied. This welding process was done by autogenus and conductive method. Microstructure were observed by metallurgical OM and SEM. Results shown Solidification of the weld metal is dendritic. The dendrites in the central zone of the welding are fine and equ...

In submerged arc welding process, the understanding of temperature distribution is essential in order to control the dimension of heat affected zone and to get the required weld bead shape and size etc. Moreover, the temperature profile is required to estimate the stress distribution in thermo mechanical analysis of the process. In this work, a numerical solution for moving heat source with Gau...

This study investigated the effects of the hot isostatic pressing process on the crack healing, microstructure, and mechanical properties of the laser repair-welded CM247LC precipitation-hardened superalloy. To ensure the strength of the repair-welded area, this study used the direct re-melting approach, and simulated the repair welding with the filler addition, which has a chemical composition...

In the present work CO2 continuous laser welding process was successfully applied and optimized for joining a dissimilar AISI 316 stainless steel and AISI 1009 low carbon steel plates. Laser power, welding speed, and defocusing distance combinations were carefully selected with the objective of producing welded joint with complete penetration, minimum fusion zone size and acceptable welding pro...

The forming of low and high strength tailor welded steel sheets into preferred three-dimensional shapes by a homogeneous distribution plastic strain is highly difficult. In this work, the formability tailor-welded blanks prepared using laser welding (IS 513 CR2, IS CR3) tensile (AISI 304) were analyzed formation edge profile weld line movement was also examined. results showed decrease in chara...

Friction stir welding is a solid-state method that produces joints with superior mechanical and metallurgical properties. However, the negative effects of thermal cycle during dent performance weld joint. Hence, in this research study, joining aluminum tailor welded blanks by friction carried out underwater conditions varying parameters. The tensile tests revealed samples showed better results ...