Highly textured undoped (pure) and Al doped ZnO nanocrystalline thin films prepared by ultrasonic atomization and pyrolysis method are reported in this paper. ZnCl2 water solution was converted into fine mist by ultrasonic atomizer (Gapusol 9001 RBI Meylan, France). The mist was pyrolyzed on the glass substrates in horizontal quartz reactor placed in furnace. The Structural and microstructural ...

In this research, an industrial spray dryer was used and the effects of atomizer speed on the physicochemical properties of milk powder, the textural and sensory characteristics of white cheese made from this milk powder were evaluated. For this purpose, whole milk was converted into powder by using three different speeds (10,000, 11,000, and 12,000 rpm). The results showed that by increasing a...

In recent years process heap-based attacks have increased significantly. These attacks exploit the system under attack via the heap, typically by using a heap spraying attack. A large number of malicious files and URLs offering dangerous contents are potentially encountered every day, both by client-side and server-side applications. Static and dynamic methods have been proposed to detect heap-...

Interferences of some metals in the determination of arsenic by hydride generation atomic absorption spectrometry utilizing a quartz tube atomizer were studied. The atomizers were coated under vacuum with Ni, Au, Pd and Cr. The arsenic signal was almost totally suppressed by all the metal coatings and thus the interferences from metal ions in the determination of arsenic were attributed both to...

Antimony is one of the constituents of pewter, an alloy composed of a minimum of 90% tin with the balance being made up with copper, antimony and perhaps some bismuth. A method has been developed to determine Sb in acetic acid leachates from pewter cups. The employed instrumentation, an atomic absorption spectrometer, equipped with a quartz trap-and-atomizer device, is simple and relatively ine...

The knowledge of droplet size distribution and concentration allows us to calculate the wetness fraction isentropic turbine efficiency as well provide significant data for erosion modeling. For that purpose, a miniature optical extinction probe with diameter 9.4mm was designed, manufactured tested. is equipped heater, which maintains all components clean from any water contamination. In this pa...

Our work is being conducted with the aim to develop an effervescent atomizer for industrial burners that will generate a fine and stable spray in large turn-down ratio. The single-hole, plain orifice atomizer is powered with light heating oil and uses air as an atomizing medium in the “outside-in” gas injection configuration. Published design concepts of the effervescent atomizer are described....