investigating nozzle’s orifice flow is challenging both experimentally and theoretically. this paper focuses on simulating flow inside diesel injector nozzle via ansys fluent v15. validation is performed with experimental results from winkhofler et al (2001). several important parameters such as mass flow rate, velocity profiles and pressure profiles are used for this validation. results includ...

This paper examines the roles that granular flow theory might play in the modeling the solid-phase stresses in fluidized beds. It begins with a discussion of the historical limiting cases of the quasistatic and rapid-flow regimes. It then reviews the elastic granular theories that unify those two regimes. Finally it shows that measurements of solid-phase pressures cannot be explained by commonl...

in this paper, a non-isothermal two-phase flow in the cathode gas diffusion layer (gdl) of pem fuel cell is modeled. the governing equations including energy, mass and momentum conservation equations are solved by numerical methods. also, the optimal values of the effective parameters such as the electrodes porosity, gas diffusion layer (gdl) thickness and inlet relative humidity are calculated...

flow regime in dam's bottom outlet is divided in pressurized flow and free surface flow by the gate located for discharge control. down stream tunnel involves high velocity multi component air –water flow studied by mathematical model. in this research work, we used finite volume mixture two phase flow model. because of high reynolds number, standard two equations k-e turbulence model was ...

Multiphase flows are commonly encountered in oil and gas industries. The transport of multiphase flow causes the formation of slug, the increase of pressure drop and the possibility of phase changes therefore, a set of simulation runs was performed to predict flow regimes in a horizontal pipeline, and the results were compared with the Baker chart. The effects of small downward inclinations of ...

Gas assisted atomization is becoming increasingly important in many industrial applications such as physical, chemical and petroleum processes. In order to achieve proper atomization it is crucial to have proper mixing of gas (air) and liquid (water) in the feeding conduit before it enters into the nozzle. The flow regime, as well as the flow pattern and structure of the flow, are some of the i...

in this paper, the problem of turbulent forced convection flow of water- alumina nanofluid in a uniformly heated pipe has been thoroughly investigated. in numerical study, single and two-phase models have been used. in single-phase modeling of nanofluid, thermal and flow properties of nanofluid have been considered to be dependent on temperature and volume fraction. effects of volume fraction a...