One way to increase the heat transfer is to use perforated twisted tapes with different hole diameters, which largely improve heat transfer with an increase in the heat transfer area at the constant volume and more mixed flow. In the previous studies, the effect of nanofluids with perforated twisted tapes is less studied. In this work, the performance of water / iron oxide nanofluid in a double...

the performance of a γ-al 2 o 3 /n-decane nanofluid shell-and-tube heat exchanger in a biomass heating plant is analyzed to specify the optimum condition based on the maximum heat transfer rate and performance index for wide range of nanoparticle volume fraction (0–7%). compared with pure          n-decane, the obtained results in this research show that by using γ-al 2 o 3 /n-decane nanofluid ...

heat exchangers are one of the most important devices of mechanical systems in modernsociety. most industrial processes involve the transfer of heat and more often they requirethe heat transfer process to be controlled. a heat exchanger is the heat exchanged betweentwo media, one being cold and the other being hot. there are different types of heatexchanger, but the type which is widely used in...

An experimental study of heat transfer characteristics with and without insert was found using water –water system on 1-2 pass shell and tube heat exchanger. Experimental results such as exchanger effectiveness, overall heat transfer coefficient were calculated using with and without insert. There is improvement in overall heat coefficient, efficiency in using twisted tape. In all the process i...

Energy saving is major matter in our global world, and heat exchanger is very useful for energy saving. Of course heat exchanger is most significant component for chemical reaction, distillation, dissolution, crystallization, fermentation etc. So the correct selection of heat exchanger is important in these processes. Spiral tube Heat Exchangers are known as excellent heat exchanger because of ...

many studies are performed by researchers about shell and tube heat exchanger but the multi-objective big bang-big crunch algorithm (mobba) technique has never been used in such studies. this paper presents application of thermal-economic multi-objective optimization of shell and tube heat exchanger using mobba. for optimal design of a shell and tube heat exchanger, it was first thermally model...

A shell and tube heat exchanger is a class of heat exchanger designs seen most common type of heat exchanger in oil refineries and other large chemical processes, and is suited for higher-pressure applications. As its name implies, this type of heat exchanger consists of a shell (a large pressure vessel) with a bundle of tubes inside it. One fluid runs through the tubes, and another fluid flows...

In this research, heat transfer enhancement and simultaneous effect of that on pressure drop inside condensers with twisted tape inserts are investigated. A refrigeration system is designed for attaining to maximum level of heat transfer with minimum pressure drop. The test condenser is a double pipe heat transformer with inner and outer diameter of 10.7mm and 12.7mm for internal pipe, respecti...

In this paper, fluid flow and heat transfer in the laboratory (small size) shell tube heat exchanger are analysed by computational fluid dynamic software. In this type of shell tube heat exchanger baffles with different angles of rotation: 00 (horizontal segmental baffle), 150 (from horizontal), 300, 450, 600, 750, 900 (vertical segmental baffle) is used. Effect of baffle orientation on shell t...