Graphene oxide (GO) can be readily modified for particular applications due to the existence of abundant oxygen-containing functional groups. Graphene oxide-based materials (GOBMs), which are biocompatible and hydrophilic, have wide potential applications in biomedical engineering and biotechnology. In this review, the preparation and characterization of GO and its derivatives are discussed at ...

in the past 30 years, electroless nickel (en) plating has grown to such proportions that these coatingsand their applications are now found underground, in outer space, and in a myriad of areas inbetween. moreover, in order to further improve the mechanical and tribological properties of thenickel-phosphorous (ni-p) coatings, ni-p/ptfe composite coatings can be obtained, which provideseven grea...

in the present work, structural characteristics and tribological properties of the ti-al-cr-(si)-c-n nanocomposite films coated on the spk 1.2080 tool steel bypvd technique have been investigated. the pvd coating process was carried out using ti (si) al and cral cathodes at 150 a current, 40 v bias and (ar)0.1(ch4)0.45(n2)0.45 gas mixture for 50 min. evaluations were conducted by om, fesem, afm...

Biopolymers reinforced with nanoparticle (NP) additives are widely used in tribological applications. In this study, the effect of NP additives on the tribological properties of a green lubricant hydroxypropyl methylcellulose (HPMC) composite was investigated. The IF-MoS₂ NPs were prepared using the newly developed gas phase sulfidation method to form a multilayered, polyhedral structure. The n...

The tribological properties of two smooth surfaces in the presence of a thin confined film are investigated with a generic model for the interaction between two surfaces and with computer simulations. It is shown that at large normal contact pressures, an ultra thin film automatically leads to static friction between two flat surfaces-even if the surfaces are incommensurate. Commen-surability i...

Artificially fabricated surface textures can significantly improve the friction and wear resistance of a tribological contact. Recently, this surface texturing technique has been applied to polymer materials to improve their tribological performance. However, the wear behavior of textured tribo-pairs made of steel and polymer materials has been less thoroughly investigated and is not well under...

Cu/Ti3SiC2/C/BN/GNPs nanocomposites were prepared by vacuum hot-pressing (HP) sintering and hot isostatic pressing (HIP) sintering methods. Microstructures, mechanical and tribological properties of Cu/Ti3SiC2/C/BN/GNPs nanocomposites were investigated. Microstructures were examined by optical microscopy (OM), X-ray diffraction (XRD) and scanning electron microscope (SEM). Mechanical properties...

Surface modification is a promising method to solve the tribological problems in microsystems. To modify the surface, we fabricated hierarchical patterns with different pitches of nano-scale features and different surface chemistries. Micro- and nano-patterns with similar geometrical configurations were also fabricated for comparison. The nano-tribological behavior of the patterns was investiga...

The aim of this study was to evaluate the friction and wear behavior of ultra high molecular weight polyethylene (UHMWPE) against 3Y-TZP and a novel 3Y-TZP/niobium (Nb) biocomposite. The ceramic and the biocomposite materials were subjected to an accelerated aging process to evaluate the changes in the tribological behavior after this treatment. To carry out the tribological tests, a reciprocat...

An intermetallic nickel-titanium alloy, 60NiTi (60wt%Ni, 40wt%Ti), is shown to be a promising candidate tribological material for space mechanisms. 60NiTi offers a broad combination of physical properties that make it unique among bearing materials. 60NiTi is hard, electrically conductive, highly corrosion resistant, readily machined prior to final heat treatment, and is non-magnetic. Despite i...