Coating titanium alloy implants with titanium nitride (TiN) by the method of Powder Immersion Reaction Assisted Coating (PIRAC) produces a stable layer on their surface. We have examined the ability of the new TiN coating to undergo osseointegration. We implanted TiN-coated and uncoated Ti6Al4V alloy pins into the femora of six-month-old female Wistar rats. SEM after two months showed a bone co...

Application of surface modification methods is expected to be a supreme solution to diminishing fretting damage. In this study, our aim was to improve the fretting fatigue life of Al7075-T6 alloy by covering it with a TiN thin film hard coating using the magnetron sputtering technique. Coated specimens with the best surface hardness, adhesion strength and roughness were tested with a rotating b...

Titanium Nitride (TiN) coatings have led the way for providing increased wear resistance and extended life of cutting tools, whether carbide inserts or high-speed steel. Where the earliest applications were for high temperature substrate materials (carbides) and chemical vapor deposition (CVD) was the process of choice, later developments in the physical vapor deposition (PVD) technology, espec...

In this paper, we reviewed researches about the titanium nitride (TiN) and titanium carbide (TiC) single and multilayer coatings. These coatings were deposited by the plasma assisted chemical vapor deposition (PACVD) technique. Plasma-based technologies are used for the processing of thin films and coatings for different applications such as automobile and aerospace parts, computer disc drives,...

PURPOSE The aim of this study was to evaluate antibacterial activity and osteoblast-like cell viability according to the ratio of titanium nitride and zirconium nitride coating on commercially pure titanium using an arc ion plating system. MATERIALS AND METHODS Polished titanium surfaces were used as controls. Surface topography was observed by scanning electron microscopy, and surface roughn...

Abstract DC magnetron sputtering was used to deposit titanium (Ti), nitride (TiN), and Ti/TiN multilayer coatings on Ti6Al4V alloy substrates. The have 1, 4, 10, 16, 32 modulation periods respectively. SEM were analyze the surface cross-sectional micro-features of coatings. Electrochemical tests carried out 3.5 wt% NaCl solution at room temperature. resistance coating reaches maximum value, whi...

This paper examines the blood chamber of a left ventricular assist device (LVAD) under static loading conditions and standard operating temperatures. The LVAD’s walls are made of a temperature-sensitive polymer (ChronoFlex C 55D) and are covered with a titanium nitride (TiN) nano-coating (deposited by laser ablation) to improve their haemocompatibility. A loss of cohesion may be observed near t...

The Polish ventricular assist device, POLVAD_EXT, is made of a polymer designed to be covered with a nanocoating of titanium nitride to improve haemocompatibility. A loss of cohesion can occur between the coating and the substrate. An analysis of stress and strain states in a multi-scale model of the blood chamber was performed in the finite element computer program, VADFEM. The multiscale mode...

Cubic boron nitride (cBN) particles coated with 20 wt% nanocrystalline TiN were prepared by coating the surface of cBN particles with TiO2, followed by nitridation with NH3 gas at 900 degrees C. Coating of TiO2 on cBN powders was accomplished by a sol-gel process from a solution of titanium (IV) isopropoxide and anhydrous ethanol. An amorphous TiO(x) layer of 50 nm thickness was homogenously fo...

Aerospace applications and energy-saving strategies in general raised the interest and study in the field of lightweight materials, especially on aluminum alloys. Aluminum alloy itself does not have appropriate wear resistance. Therefore, improvement of surface properties is required in practical applications, especially when aluminum is in contact with other parts. In this work, first titanium...