Often when vehicles interact with roadside hardware like guardrails, bridge rails and curbs, the interaction between the roadside hardware and the tire causes the tire to lose its air seal and "blow-out". Once the seal between the rim and rubber tire is lost, the tire deflates. The behavior of the deflated tire is much different than the behavior of an inflated tire such that when this behavior...

Tire dust is a significant pollutant, especially as a source of zinc in the urban environment. This study characterizes the morphology and chemical composition of heavy metal particles embedded in tire dust and traffic-related materials (brake dust, yellow paint, and tire tread) as measured by a field emission scanning electron microscope equipped with an energy dispersive X-ray spectrometer (F...

One of the great enemies of rubber compounds is heat. Heat will cause chemical and physical degradation of vulcanized rubber as well as a considerable loss in its strength. A major source of heat generation in a tire is due to internal friction resulting from the viscoelastic deformation of the tire as it rolls along the road. Another source of heat generation in a tire is due to its contact fr...

This article presents methods for estimating lateral vehicle velocity and tire cornering stiffness, which are key parameters in vehicle dynamics control, using lateral tire force measurements. Lateral tire forces acting on each tire are directly measured by load-sensing hub bearings that were invented and further developed by NSK Ltd. For estimating the lateral vehicle velocity, tire force mode...

The interaction between the tire and road has long been of interest for vehicle dynamic simulation. A planar tire model is developed to capture the tire circumferential displacements and calculate the spindle force according to the tire shape. The tire is discretized into segments and Hamilton’s principle is used to derive the model mathematical expression. It is shown that the static constrain...

ABSTRACT: The objective of this paper is to investigate a class of general tire models that provides results suitable for usage in vehicle dynamics. Tire models currently used for vehicle dynamic analyses are overly simplistic (springs, a spring and damper combination or semi-elastic substance) or based on curve fits of experimental data. In contrast, the tire models used by major tire companie...

excessive production and stockpile of scrap tires cause some environmental and sanitary risks throughout the world. to manage these materials, possible use of soil-tire mixtures has been recently propounded in civil engineering projects. a few studies previously have been conducted to evaluate behavior of clay-tire mixtures, while swelling properties, consolidation and settlement characteristic...

In-situ sensing the tire–road interactions such as local contact friction force distributions provides crucial information for building accurate friction force models for vehicle safety control. In this paper, we report the development of an embedded, flexible local force sensor for measuring the tire local friction forces and their distributions. A new pressuresensitive, electric conductive ru...

Use of tire shreds in construction projects, such as highway embankments, is becoming an accepted way of beneficially recycling scrap tires. However, in the last decade there was a decline in the use of pure tire shreds as fill materials in embankment construction, as they are susceptible to fire hazards due to the development of exothermic reactions. Tire shred-sand mixtures, on the other hand...

Tires are a key sub-system of vehicles that have a big responsibility for comfort, fuel consumption and traffic safety. However, current tires are just passive rubber elements which do not contribute actively to improve the driving experience or vehicle safety. The lack of information from the tire during driving gives cause for developing an intelligent tire. Therefore, the aim of the intellig...