TiO2 nanotube arrays are very attractive for dye-sensitized solar cells (DSSCs) owing to their superior charge percolation and slower charge recombination. Highly ordered, vertically aligned TiO2 nanotube arrays have been fabricated by a three-step anodization process. Although the use of a one-dimensional structure provides an enhanced photoelectrical performance, the smaller surface area redu...

The detection of partial discharge and analysis of SF6 gas components in gas-insulated switchgear (GIS) is important for the diagnosis and operating state assessment of power equipment. The use of a Pt-doped TiO2 nanotube arrays sensor for detecting sulfur hexafluoride (SF6) decomposition products is proposed in this paper. The electrochemical pulse deposition method is employed to prepare the ...

Hierarchical TiO2 nanotube arrays grown on Ti foil are yielded by subjecting electrochemically anodized, vertically oriented TiO2 nanotube arrays to hydrothermal processing. The resulting DSSCs exhibit a significantly enhanced power conversion efficiency of 7.24%, which is a direct consequence of the synergy of higher dye loading, superior light-scattering ability, and fast electron transport.

We report here for the first time the synthesis of two novel hierarchical homogeneous nanoarchitectures of TiO2 nanorods branched TiO2 nanotube arrays (BTs) and P25-coated TiO2 nanotube arrays (PCTs) using two-step method including electrochemical anodization and hydrothermal modification process. Then the photocurrent densities versus applied potentials of BTs, PCTs, and pure TiO2 nanotube arr...

TiO2 micro-flowers were made to bloom on Ti foil by the anodic oxidation of Ti-protruding dots with a cylindrical shape. Arrays of the Ti-protruding dots were prepared by photolithography, which consisted of coating the photoresists, attaching a patterned mask, illuminating with UV light, etching the Ti surface by reactive ion etching (RIE), and stripping the photoresist on the Ti foil. The pro...

High aspect ratio of WO3-loaded TiO2 nanotube arrays have been successfully synthesized using the electrochemical anodization method in an ethylene glycol electrolyte containing 0.5 wt% ammonium fluoride in a range of applied voltage of 10–40 V for 30 min. The novelty of this research works in the one-step formation of WO3-loaded TiO2 nanotube arrays composite film by using tungsten as the cath...

TiO2 nanostructures, including nanowires, highly ordered nanotube arrays, and single crystalline nanoplates, were obtained from electrochemically anodized Ti foil in a fluorine-containing ethylene glycol electrolyte. The TiO2 nanowires, formed by the electric field induced chemical splitting of TiO2 nanotubes by fluoride ions during a lengthy anodization can be isolated from the nanotube arrays...

Instead of investigating the quantum effect that influences the absorption band edge of TiO2 nanostructures, herein we report that geometrical parameters can also be utilized to manipulate the optical band gap of the TiO2 nanotube arrays. Hexagonal arrays of TiO2 nanotubes with an excellent crystalline quality were fabricated by techniques combining anodic aluminum oxide templates and atomic la...

In this study, we used the electrochemical anodization to prepare TiO2 nanotube arrays and applied them on the photoelectrode of dye-sensitized solar cells. In the field emission scanning electron microscopy analysis, the lengths of TiO2 nanotube arrays prepared by electrochemical anodization can be obtained with approximately 10 to 30 μm. After titanium tetrachloride (TiCl4) treatment, the wal...

Large-sized titanium dioxide (TiO2) nanotube arrays with an outer diameter of approximately 500 nm have been successfully synthesized by potentiostatic anodization at 180 V in a used electrolyte with the addition of 1.5 M lactic acid. It is found that the synthesized large-diameter TiO2 nanotube array shows a superior light scattering ability, which can be used as a light scattering layer to si...