In this research, degradation of methylene blue as a dye pollutant was investigated in the presence of TiO2 nanopowders using photolysis and sonolysis systems separately and simultaneously. Effect of different parameters such as catalyst dosage, initial concentration of dye, UV power, pH and type of catalyst on the removal efficiency was ascertained. The results showed that basic pH is proper f...

tio2/zro2 nanocomposite was obtained by the sonochemical technique. in this method, two separate gels containing zirconium and titanium were prepared and mixed together. the precursor sol of zirconium was prepared from an aqueous solution of zrcl4. the precursor titanium tetra isopropoxide (ttip) dissolved in isopropanol. mixing of titanium and zirconium gels was resulted in a yellow tio2/zro2 ...

Gas sensing properties of metal oxide nanopowders (ZnO, TiO2, WO3, SnO2) with average diameters of 40-60 nm were analyzed by room-temperature photoluminescence spectroscopy. The influence of gas environment (O2, N2, H2, CO, CO2) on the emission intensity was investigated for metal oxide nanopowders with surface doped by impurities (Pt, Ag, Au, Sn, Ni or Cu). Established physicochemical regulari...

BACKGROUND The purpose of this in-vitro study was to examine the effect of incorporating different concentrations of Zirconium oxide-Titanium dioxide (ZrO2-TiO2) nanoparticles, which can have antibacterial properties, on the mechanical properties of an orthodontic adhesive. METHODS ZrO2-TiO2 (Zirconium oxide, HWNANO, Hongwu International Group Ltd, China) -Titanium dioxide, Nanoshell, USA) na...

Si nanopowder is fabricated using the simple beads milling method. Fabricated Si nanopowder reacts with water in the neutral pH region between 7 and 9 to generate hydrogen. The hydrogen generation rate greatly increases with pH, while pH does not change after the hydrogen generation reaction. In the case of the reactions of Si nanopowder with strong alkaline solutions (eg pH13.9), 1600 mL hydro...

in this research carbon nanotubes were produced by chemical vapor deposition of acetylene over a mixture of iron and cobalt catalysts supported on nanometric tio2 and the influences of two synthesis parameters: growth temperature and catalyst composition ratio on properties of end-product carbon nanotubes were investigated. the catalytic basis was prepared by wet impregnation method with differ...

TiO2/ZrO2 nanocomposite was obtained by the sonochemical technique. In this method, two separate gels containing zirconium and titanium were prepared and mixed together. The precursor sol of zirconium was prepared from an aqueous solution of ZrCl4. The precursor titanium tetra isopropoxide (TTIP) dissolved in isopropanol. Mixing of Titanium and Zirconium gels was resulted in a yellow TiO2/ZrO2 ...

TiO2/ZrO2 nanocomposite was obtained by the sonochemical technique. In this method, two separate gels containing zirconium and titanium were prepared and mixed together. The precursor sol of zirconium was prepared from an aqueous solution of ZrCl4. The precursor titanium tetra isopropoxide (TTIP) dissolved in isopropanol. Mixing of Titanium and Zirconium gels was resulted in a yellow TiO2/ZrO2 ...

structural properties and chemical composition change the photocatalytic activity in tio2-sio2 nanopowder composite. the sio2-tio2 nanostructure is synthesized based on sol–gel method. the nanoparticles are characterized by x-ray fluorescents (xrf), x- ray diffraction (xrd), tunneling electron microscopy (tem), field emission scanning electron microscopy (fe-sem), uv-vis. spectrophotometer and ...

PURPOSE This laboratory study aimed to investigate the effect of doping an acrylic denture base resin material with nanoparticles of ZnO, CaO, and TiO2 on biofilm formation. MATERIALS AND METHODS Standardized specimens of a commercially available cold-curing acrylic denture base resin material were doped with 0.1, 0.2, 0.4, or 0.8 wt% commercially available ZnO, CaO, and TiO2 nanopowder. Ener...