An experimental and numerical investigation on the effect of swirl on the motion of coal particles in the near-burner region of a versatile multi-fuel swirl-stabilised laboratory burner of total thermal input of 100kW, has been performed. The burner was designed as a scale model of a lOMW coal burner operating in a cement rotary kiln, produces flames of different aerodynamic characteristics, an...

Observations of tornadoes in the field and laboratory investigations of tornado-like end-wall vortices have both demonstrated the complexity of this fluid phenomenon. The structure of the core region in particular depends on a number of parameters, one being the swirl ratio (S), i.e the degree of swirl in the background flow (DaviesJones, 1976), another being the degree of roughness of the unde...

Instability of a swirling annular liquid sheet in swirling inner and outer air streams has been investigated by a temporal linear stability analysis. The effects of the swirling and axial motion of the liquid and the air streams, as well as the effects of relative inner and outer air swirl orientation with respect to the liquid swirl direction on the instability have been investigated. Results ...

Small diesel engines are widely used for commercial vehicle and passenger car applications due to their higher torque requirements, fuel economy, and better thermal efficiency. These engines are exposed to different operating and environmental conditions and hence emissions from these engines are erratic. Strategies are required to enhance performance and reduce engine-out emissions considering...

This paper presents a numerical investigation of two horizontally mounted four-lobed swirl pipes in terms of swirl induction effectiveness into flows passing through them. The swirl flows induced by the two swirl pipes have the potential to improve the efficiency of Clean-In-Place procedures in a closed processing system by local intensification of hydrodynamic impact on the internal pipe surfa...

Labyrinth seal force estimates are important to the prediction of the stability of turbomachinery. The force prediction methods fall into several categories: experiments, bulk flow analysis, and finite volume analysis. Finite volume analysis can be split into two subcategories: selfdeveloped and commercial. In this research, a commercial computational fluid dynamics (CFD) program called ANSYSCF...

In this paper, the effect of atomizer geometry on the flow in simplex atomizers and atomizer performance is numerically investigated. A computational model based on the Arbitrary-Lagrangian-Eulerian method has been used. The effect of changes in four non-dimensional geometric parameters on the atomizer performance is studied. These geometric parameters are the atomizer constant (ratio of inlet ...

Unsteady forces generated by fluid flow through the impeller shroud leakage path of a centrifugal pump were investigated. The effect of leakage path inlet swirl (pump discharge swirl) on the rotordynamic forces was re-examined. It was observed that increasing the inlet swirl is destabilizing both for normal and tangential rotordynamic forces. Attempts to reduce the swirl within the leakage path...

A non-parallel analysis of time-oscillatory instability of conical jets reveals important features not found in prior studies. Flow deceleration significantly enhances the shearlayer instability for both swirl-free and swirling jets. In swirl-free jets, flow deceleration causes the axisymmetric instability (absent in the parallel approximation). The critical Reynolds number Rea for this instabi...

The influence of the inlet swirl velocity profile shape on the decay of swirl in steady-state, incompressible, laminar pipe flows is investigated by means of computational fluid dynamics. The investigation is carried out for a Reynolds number of 2000, which marks the upper limit of the laminar flow behavior for unidirectional pipe flow. Computations are performed for two different mean swirl nu...