in this paper the critical strain energy release rate for t300/913 carbon-epoxy laminated composites has been studied using ansys finite element software based on virtual crack closure technique ( vcct ). compact tension ( ct ) specimen has been used for numerical analyses and the geometrical dimensions have been extracted from the existing references. the results obtained from the finite eleme...

The stability theories energetically associated with different finite strain measures are equivalent if the tangential moduli are transformed as a function of the stress. However, for homogenized soft-in-shear composites, they can differ greatly if the material is in small-strain and constant elastic moduli measured in small-strain tests are used. Only one theory can then be correct. The preced...

In this study static and fatigue behaviours of honeycomb sandwich composites, made of aramide fibres and aluminium cores, are investigated through four-point bending tests. Damage and failure modes are reported and discussed. Global and local parameters were considered to evaluate the fatigue life of the analysed sandwich composites. Effects of core densities and the cell orientation (L or W) o...

The compressive creep and the recovery of commercially available composites, 2 kinds for posterior and 2 kinds for anterior use, in water were examined. In posterior composites, creep strain after 500h at a stress level of 8.3 kgf/mm2 was significantly small (within 1%). The results of the compressive creep test showed that posterior composites would be resistant to occlusal stress. Creep strai...

The flexural properties of commercial bagasse-filled polyethylene (PE) and polypropylene (PP) composites were determined as a function of strain rate at room temperature. The applied strain rates were 1.5 ×10, 3.75×10, 7.5×10, and 1.5×10 s. The flexural modulus tended to increase linearly for the two types of composites with the logarithm of strain rate. The bending strength of polypropylene co...

A new severe plastic deformation (SPD) based technique entitled Accumulative channel-die compression bonding (ACCB) is proposed for the fabrication of high strength multi-layered Al/Cu composites for the first time. In order to primarily demonstrate the capabilities of ACCB in the fabrication of metal matrix composites (MMCs), AA 1050 and pure Cu strips were processed. The primary Al/Cu sandwic...

Whether used as structural components in design or matrix materials for composites, the mechanical properties of polymers are increasingly important. The compressive response of extruded polymethyl methacrylate (PMMA) rod with aligned polymer chains and Al-Ni-PMMA particulate composites are investigated across a range of strain rates and temperatures. The particulate composites were prepared us...

In this paper, the non-linear dynamic response of novel steel sandwich panel with hollow I-core subjected to blast loading was studied. Special emphasis is placed on the evaluation of midpoint displacements and energy dissipation of the models. Several parameters such as boundary conditions, strain rate, mesh dependency and asymmetrical loading are considered in this study. The material and geo...