نتایج جستجو برای: strain rate
تعداد نتایج: 1154942 فیلتر نتایج به سال:
in this study, the strain rate effect on the bending properties of fiber reinforced composites for three types of polymer composites namely phenolic resin reinforced by woven basalt fibers, woven carbon fibers, and woven basalt/ woven carbon fibers at a total volume fraction of approximately 35% has been determined. flexural tests have been conducted at low range of strain rates included 0.03 m...
the dynamic behavior of three high manganese steels with very different stacking faultenergy (sfe) values (4-30 mj/m2) were studied using high strain rate torsional tests. the hotrolledmicrostructure of the steel with the lowest sfe of 4 mj/m2 consisted of a duplex mixture ofaustenite and ε-martensite, but those of the other two steels were fully austenitic. the deformedmicrostructures were stu...
In this work, dynamic mechanical properties of three high-manganese steels with TRIP/TWIP or fully TWIP characteristics are studied. High strain rate experiments in the range of true strain rates between ~500 and 1800 /s are conducted using a dynamic torsional testing setup. All the three steels show a positive strain rate sensitivity in the intermediate range of strain rates (up to 500 /s). Bu...
Under plane stress conditions, most micromechanical and phenomenological models predict a minimum in ductility for strain tension state. Therefore, the state of plays crucial role many forming crash applications reliable measurement to fracture is particularly when calibrating modern initiation models. Recently, new experimental technique has been proposed measuring sheet metal after proportion...
in this work, dynamic mechanical properties of three high-manganese steels with trip/twip or fully twip characteristics are studied. high strain rate experiments in the range of true strain rates between ~500 and 1800 /s are conducted using a dynamic torsional testing setup. all the three steels show a positive strain rate sensitivity in the intermediate range of strain rates (up to 500 /s). bu...
in this paper, the hydrogen embrittlement of the high strength cr-si spring steel with after zn-12%ni electroplating, have been evaluated. slow strain rate test with 3.34 × 10 -6 sec -1 strain rate was performed, and the hydrogen embrittlement index of the different samples was calculated. the effect of shot peening before plating and the baking after plating and also the effect of applying a n...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید