to compare the mechanical properties of resilon and gutta-percha cones after storing at three different temperatures.one-hundred standardized size 40/02 gutta-percha cones and 100 resilon cones were randomly divided into four groups. the first group of the materials were tested immediately after receipt as the control group. the other three were stored in their packages at -12°c, 4± 1°c and 22±...

In this research, high oxygen-barrier films were organized based on low-density polyethylene (LDPE)/ ethylene vinyl alcohol (EVOH)/ polyethylene-grafted maleic anhydride (LDPE-g-MA) compatibilizer. The effects of 10–30 wt. % EVOH and 0–10 wt. % LDPE-g-MA loadings on the properties of final films were evaluated. The morphology of specimens was observed by using scanning electron microscopy (SEM)...

The objective of the present study is to systematically characterize a nonlinear viscoelastic behavior of petroleum jelly in large amplitude oscillatory shear flow fields correspondent to the rubbing condition onto the human body. With this aim, using a strain-controlled rheometer, the dynamic viscoelastic properties of commercially available petroleum jelly have been measured at 37oC (body tem...

BACKGROUND Articular cartilage is a viscoelastic material, but its exact behaviour under the full range of physiological loading frequencies is unknown. The objective of this study was to measure the viscoelastic properties of bovine articular cartilage at loading frequencies of up to 92 Hz. METHODS Intact tibial plateau cartilage, attached to subchondral bone, was investigated by dynamic mec...

OBJECTIVES Glass-ceramic veneered zirconia is used for the application as fixed partial dentures. The aim of this investigation was to evaluate whether the heat treatment during veneering, the application of glass-ceramic for veneering or long term storage has an influence on the storage modulus of zirconia. METHODS Zirconia bars (Cercon, DeguDent, G; 0.5x2x20 mm) were fabricated and treated ...

Oscillatory measurements of a columnar structure were performed, which was formed in an immiscible polymer blend subjected to an electric field. The formation process was observed through a confocal scanning laser microscope and the structure for the measurements was confirmed to be well defined. The storage shear modulus at low frequencies increased with increasing the electric field. A linear...

The viscoelastic response of a material offers an alternative method for analyzing its microstructure, phase transformations and fatigue behaviour. In this work, the viscoelastic properties of commercial aluminium alloy (AA) 7075-T6 are studied with a Dynamic-Mechanical Analyzer (DMA), and results are combined with Transmission Electron Microscopy (TEM) and Differential Scanning Calorimetry (DS...

The purpose of this study was to evaluate the dynamic viscoelastic properties of experimental silicone soft lining materials, Silastic MDX 4-4210 reinforced with silica fillers. Storage modulus (E'), loss modulus (E") and damping factor (tan delta) were determined using a dynamic mechanical analyzer under a deformation strain level of 0.27% at test frequency and a temperature range of 1 Hz and ...

The objective of this study was to determine rheological behaviors of maple veneer plastic composite (MVPC) prepared by full cell preparation technology through the use of a rotational rheometer. The results showed that at 25 to 105 °C, the storage modulus G' and loss modulus G'' of the MVPC were apparently higher than that of the control. In the range 105 to 210 °C, the storage modulus G' of t...

Pistachio paste is produced from ground roasted kernel. This study focused on the influence of the milling process on colloidal stability, rheological behavior and color of pistachio paste. The colloidal stability of pistachio paste samples increased with a reduction of particle size from 31.4 to 15.10µm. The Herschel-Bulkley model was found to be the best model to describe the flow behavior of...