We describe an optimization tool for a multistage production process for rectangular steel plates. The problem we solve yields a production design (or plan) for rectangular plate products in a steel plant, i.e., a detailed list of operational steps and intermediate products on the way to producing steel plates. We decompose this problem into subproblems that correspond to the production stages,...

This article presents the results of a series of experiments performed to assess the dynamic response of circular monolithic steel and steel–polyurea bilayer plates to impulsive loads. A convenient technique to enhance the energy absorption capability of steel plates and to improve their resistance to fracturing in dynamic events, is to spray-cast a layer of polyurea onto the plates. Since poly...

In this paper, we present and discuss the results of our numerical simulation of the dynamic response and failure modes of circular DH-36 steel plates and DH-36 steel–polyurea bilayers, subjected to impulsive loads in reverse ballistic experiments. In our previous article, we reported the procedure and results of these experiments [MR Amini, JB Isaacs, S Nemat-Nasser. Experimental investigation...

A steam sterilizer (autoclave) was tested to determine the operating parameters that affected sterilization of microbiological waste. Tests involved standardized loads (5, 10 ad 15 lb [ca. 2.27, 4.54, and 6.80 kg, respectively]) contaminated petri plates in autoclave bags placed in polypropylene or stainless steel containers. Thermal and biological data were obtained by using a digital potentio...

OBJECTIVE To analyze the influence of steel plates for osteosynthesis on the velocity of ultrasound propagation (VU) through the bone. METHODS The transverse coronal and sagittal velocity of ultrasound propagation underwater were measured on the intact bone and then on assemblies of the same bone with two types of osteosynthesis plates (DCP and semi tubular), fixed onto the dorsal side of the...

We examine the elastic shear waves generated in a thin pre-stressed elastomer layer that is sandwiched between two relatively thick steel plates and is subjected to an elastic shear wave traveling in one of the steel plates. The elastomer layer has been deformed in uni-axial strain in advance, producing in the layer very large axial and lateral compressive stresses of the order of its bulk modu...

At BAM, the Federal Institute for Materials Research and Testing, a group of scientists develops NDTapplications based on GMR sensor technology. In particular, the knowledge gained in the field of automated testing systems based on the magnetic flux leakage (MFL) were combined with GMR sensors to achieve high resolution testing of ferromagnetic materials. In cooperation with Europe’s second lar...

The resistance to hydrogen embrittlement is of essential importance for steels for vessels for storage of hydrocarbons and depends on the effect of absorbed hydrogen on steel ductility. API tests have shown for the 490 MPa yield stress HSLA steels with the microstructure of ferrite and cementite particles a much greater reduction of area than for the 350 MPa steel with the microstructure of pol...

The Companhia Siderúrgica Paulista – COSIPA is an integrated steel plant of the Usiminas System located in the municipality of Cubatão, in the coastal region of the São Paulo state, Brazil. This works produces 4.5 millions tons of steel per year; 1.0 million tons of this output are delivered as rolled plates, which meet a wide range of uses, such as those in agricultural implements, industrial ...

This study was a retrospective chart review of the cases operated for maxillofacial trauma with plate osteosynthesis in Oral and Maxillofacial Surgery Unit of Khyber College of Dentistry Peshawar, Pakistan, and was designed to evaluate the frequency and various reasons for the removal of the stainless steel plates in maxillofacial trauma patients. It was conducted on patients who were treated w...