Steel Plate Shear Wall (SPSW) is an emerging seismic load-resistant system that, compared to other systems, enjoys the advantages of stable ductile behavior, fewer detailing requirements, rapid constructability, and economy. American seismic provisions decree that a SPSW should be designed as a moment frame with a web infill plate. Specifically, in case of buildings taller than 160 ft, it decre...

The following nomenclature is used in this Chapter: a allotriomorphic ferrite aa acicular ferrite a w Widmanstatten ferrite ~ delta-ferrite !:i.0' increment in yield stress I austenite € true strain € true average strain €~ true plastic strain in softer phase of a dual-phase steel €~I true plastic strain in harder phase of a dual-phase steel €UTS true strain at ultimate tensile stress €y true s...

the microstructure of dual phase steels can be considered as a matrix of ferrite phase reinforced by martensite particles. recent measurements show that the mechanical properties of the ferrite phase are changed with the distance from the martensite grains. in this paper, a new method has been proposed to consider this phenomenon in finite element modeling of dual phase steels microstructure. i...

A testing strategy and corresponding test plan have been presented for the two proposed US candidate breeder blankets: (1) a helium-cooled solid breeder concept with ferritic steel structure and Be neutron multiplier, but without a fully independent TBM and (2) a dual-coolant helium-cooled ferritic steel structure with self-cooled LiPb breeding zone that uses a flow channel insert as MHD and th...

PURPOSE This study was conducted to evaluate the effects of full-coverage all-ceramic zirconia, lithium disilicate glass-ceramic, leucite glass-ceramic, or stainless steel crowns on antagonistic primary tooth wear. MATERIALS AND METHODS There were four study groups: the stainless steel (Steel) group, the leucite glass-ceramic (Leucite) group, the lithium disilicate glass-ceramic (Lithium) gro...

The subje t of this paper is to present a theory for the dynami radiation for e produ ed by dual-frequen y ultrasound beams in lossless and non-dispersive uids. A formula for the dynami radiation for e exerted on a three-dimensional obje t by a dual-frequen y beam is obtained stemming from the uid dynami s equations. Dependen e of the dynami radiation for e to nonlinear e e ts of the medium is ...

A quantitative and automated phase analysis of dual-phase (DP) steel using electron backscatter diffraction (EBSD) was attempted. A ferrite-martensite DP microstructure was produced by intercritical annealing and quenching. An EBSD map of the microstructure was obtained and post-processed for phase discrimination. Band slope (BS), which was a measure of pattern quality, exhibited much stronger ...

The use of fly ash is not only in harmony with the concept of sustainable development, but also beneficial to some mechanical properties of concrete. This paper discusses steel corrosion rate time-changing law in concrete with different replacing ratios of low calcium fly ash(10%~30%) and the microcosmic characteristic of concrete-steel interface. The steel corrosion rate was tested by linear p...