The effects of carbon content on the dynamic and static softening mechanisms of Ti microalloy steels were investigated both in ferrite and austenite regions. &#10The results obtained showed that recrystallization rate decreased as the percentage of carbon content was increased from 0.0035 to 0.110. This is due to the Ti(CN) and TiC precipitates and also the free carbon content. In the ferrite r...

In this work dynamic recrystallization behavior of AISI 403 martensitic stainless steel was studied using hot compression tests over temperature range of 900 C -1200 C and strain rate range of 0.001 s-1 - 1 s-1. The obtained flow curves showed that the hot compression behavior of the alloy is controlled by dynamic recrystallization. The flow stress and strain corresponding to the critical, pe...

Tough pitch copper wire (99.97% Cu) is generally characterized by the spiral elongation number. The principle of the test is based on the influence of impurities on the recrystallization kinetics. Alternative non-metallographic techniques to characterize the recrystallization kinetics have been investigated in this study, such as differential scanning calorimetry (D.S.C.) and residual electrica...

A mesoscale model is developed by integrating the rate theory and phase-field models and is used to study the fission-induced recrystallization in U-7Mo alloy. The rate theory model is used to predict the dislocation density and the critical size and density of the recrystallized nuclei due to irradiation. The predicted fission rate and temperature dependences of the dislocation density are in ...

The effects of carbon content on the dynamic and static softening mechanisms of Ti microalloy steels were investigated both in ferrite and austenite regions. The results obtained showed that recrystallization rate decreased as the percentage of carbon content was increased from 0.0035 to 0.110. This is due to the Ti(CN) and TiC precipitates and also the free carbon content. In the ferrite reg...

The static recrystallization/grain growth kinetics of the AZ31 (Mg-3Al-1Zn, wt%) alloy were investigated employing Vickers microhardness and electron backscatter diffraction (EBSD) measurements. was subject to a hot-rolling for 70% thickness reduction then annealed at various temperatures (150°C, 250°C, 350°C) from 5 min 24 h. First, recrystallization analysed by means Johnson-Mehl-Avrami-Kolmo...

Recrystallization kinetics and two critical temperatures—the non-recrystallization temperature TNR the static recrystallization TSRCT—of five Nb, Ti, V microalloyed steel grades are evaluated. The experimental examination is realized by employing isothermal double-hit compression tests continuous hot torsion tests, both performed on a Gleeble® 3800 thermo-mechanical simulator. results used for ...

determination of critical points on hot stress-strain curve of metals is crucial in thermo-mechanical processes design. in this investigation a mathematical modeling is given to illustrate the behavior of metal during hot deformation processes such as hot rolling. the critical strain for the onset of dynamic recrystallization has been obtained as a function of strain at the maximum stress. in a...

The objective of the paper is modeling of material softening after the deformation. The main problem of almost every model with digital material representation is consideration of recrystallization as the only mechanism of material softening. Static recovery is introduced into the model based on frontal cellular automata. An influence of static recovery on softening process is twofold. Static r...