Cerium doped lutetium silicate powders were prepared by solegel process with different cerium concentrations (0, 0.01 and 0.03 mol%). The synthesized lutetium silicate powders were investigated by X-ray diffraction (XRD), TG-DTA, SEM, and Photoluminescence excitation and emissions. The crystallization of lutetium silicate is observed at 1.073 C in S2 (and S3: 1.058 C) sample. The formation of l...

Coatings prepared from nanosized powders were obtained by spraying ethanol-based colloidal solutions into a plasma plume. The powders investigated included 40 nm γ -Al2O3, 75 nm 8 wt% Y2O3-ZrO2, and 750 nm 25 wt% CeO2-ZrO2. Spray distances from approximately 50 to 63 mm were required to achieve significant coating deposition. As observed in the TEM, the typical lamella morphology of air plasma ...

In this work, hydroxyapatite/silica nanopowders were granulated to fabricate plasma sprayable feedstocks. For this purpose, the wet powders obtained by heating a hydroxyapatite/silica slurry were stirred and sieved. To realize the feedstock application in the plasma spray process, powders were deposited on titanium substrate. The morphology of granulated feedstock and sprayed coating was ...

Fine powders often tend to agglomerate due to van der Waals forces between the particles. These forces can be reduced significantly by covering the particles with nanoscaled adsorbates, as shown by recent experiments. In the present work a quantitative statistical analysis of the effect of powder flow regulating nanomaterials on the adhesive forces in powders is given. Covering two spherical po...

In additive manufacturing, powder characteristics play an important role in terms of flowability and densification, which can be improved by the use spherical powders. this study, irregular was spheroidised plasma treatment, properties were measured. Powder characterisation conducted to determine morphology, particle size distribution as well flowability. Spherical AISI 304 stainless steel powd...

In this paper, synthesised nanometre sized hydroxyapatite (nano-HAP) powders composed of spherical 30 ± 5 nm part icles were compacted and sintered at temperatures ranging from 650 to 1250°C to form ceramics of varying porosity and mechanical strength. The size, crystalline structure and morphology of both the synthesised nano-HAP particle powders and the compacted and sintered ceramics were in...

Fe-Cr-Al alloy nanopowders were successfully prepared by electrical wire explosion method in ethyl alcohol media. The formation of FeCr-Al alloy nanopowder was monitored by X-ray diffraction. The alloy powders have spherical shape and nanometer size. The alloy powders prepared by the electrical wire explosion method have main crystal structures of bcc Fe-Cr alloy. The geometric mean diameter an...

nanocrystalline zinc oxide (zno) powders with different morphology have been successfully synthesized by using different surfactants such as cetyl trimethyl ammonium bromide (ctab), sodium dodecyl sulphate (sds), and tri ethanol amine (tea) via hydrothermal method. the products were characterized by means of powder x-ray diffraction (xrd), scanning electron microscopy (sem), transmission electr...