in this study a series of ambient vibration tests on the triple ferrocement elevated water tanks with 150 cubic meters volume, is carried out. in order to verify the dynamic characteristics of full, half-full and one full tanks (mass eccentric system), the different arrangements of sensors are used. the effects of base rotation are also considered in the tests. natural frequencies and mode shap...

many procedures suggest for reduction of responses of riser to vortex induced vibrations (viv). natural frequencies of marine risers is an important parameter that can affect the responses of riser to viv. change of riser properties such as top tension and bending stiffness can alter natural frequencies. in this study effects of riser specifications on the responses and fatigue damage of marine...

three dimensioned finite element analysis were conducted on concrete block paving. in order to verify the calculated results, an experimental case study was analyzed. good agreement was observed between the measured and the calculated results. based on the finite element analysis results and available failure models, comprehensive design charts were developed for port and industrial pavement wh...

We present a systematic method for developing low order nonlinear models from physically based, large scale finite element models of rapid thermal processing (RTP) systems. These low order models are extracted from transient results of a detailed finite element model using the proper orthogonal decomposition (POD) method. Eigenfunctions obtained from the POD method are then used as basis functi...

background: the salvage proximal femoral osteotomy is performed in mild or moderate osteoarthritis when the articulating surfaces are normal and relieves the subject’s pain. because the importance of angular mal-alignment of the femur bone at the hip junction accurate pre-op planning based on patient specific anatomy is required to prevent any lower limb misalignment and joint problem pre-opera...

in the present study, a spectral finite element method is developed for free and forced transverse vibration of levy-type moderately thick rectangular orthotropic plates based on first-order shear deformation theory. levy solution assumption was used to convert the two-dimensional problem into a one-dimensional problem. in the first step, the governing out-of-plane differential equations are tr...

Based on classical plate theory, standard and spectral finite element methods are extended for vibration and dynamic stability of axially moving thin plates subjected to in-plane forces. The formulation of the standard method earned through Hamilton’s principle is independent of element type. But for solving numerical examples, an isoparametric quadrilateral element is developed using Lagrange ...

Based on classical plate theory, standard and spectral finite element methods are extended for vibration and dynamic stability of axially moving thin plates subjected to in-plane forces. The formulation of the standard method earned through Hamilton’s principle is independent of element type. But for solving numerical examples, an isoparametric quadrilateral element is developed using Lagrange ...