Understanding the physical behavior of polymer-based lubricants on the nanoscale is of critical importance to a myriad of engineering applications and devices. We have used molecular dynamics simulations to quantitatively evaluate the physical mechanisms underlying perfluoropolyether lubricant spreading on a solid substrate. We quantify the effect of molecular mass, molecule length, and lubrica...

The hazardous organic residual wastes produced by the sodium hydrosulfite industry are demonstrated to be convertible into a novel solid lubricant. Identification and isolation of the organic residues are achieved by Fourier transform infrared (FTIR) spectroscopy, gas chromatography-mass spectrometry (GC-MS), and nuclear magnetic resonance (NMR). FTIR and GC-MS provide important information abo...

in hard disk drives (hdd), it is necessary to decrease the flying height (fh) between the head and the disk (currently, fh is around 3-5 nm) so as to increase recording densities. retaining the solid lubricant has become a difficult proposition owing to intermittent contact between the surfaces. ztmd and z are used as solid lubricant to lubricate these interfaces. in this paper, the behavior of...

The applications of molecular surface chemistry in heterogeneous catalyst technology, semiconductor-based technology, medical technology, anticorrosion and lubricant technology, and nanotechnology are highlighted in this perspective. The evolution of surface chemistry at the molecular level is reviewed, and the key roles of surface instrumentation developments for in situ studies of the gas-sol...

In Hard Disk Drives (HDD), it is necessary to decrease the Flying Height (FH) between the head and the disk (currently, FH is around 3-5 nm) so as to increase recording densities. Retaining the solid lubricant has become a difficult proposition owing to intermittent contact between the surfaces. ZTMD and Z are used as solid lubricant to lubricate these interfaces. In this paper, the behavior of...

Motivated by the development of lubricant-infused slippery surfaces, we study a sessile drop of a nonvolatile (ionic) liquid which is embedded in a slowly evaporating lubricant film (n-decane) on a horizontal, planar solid substrate. Using laser scanning confocal microscopy we imaged the evolution of the shape of the liquid/liquid and liquid/air interfaces, including the angles between them. Re...

PEEK is a high strength engineering thermoplastic that suffers from a high friction coefficient and a friction induced wear mode. Past studies with 0 m PEEK and PTFE powders resulted in composite solid lubricant that (at the optimal composition) had a wear rate of k= 2× 10−9 mm3/Nm ith a friction coefficient of μ= 0.12. A compositional grading of PEEK and PTFE is implemented in this study to cr...

For a liquid droplet to slide down a solid planar surface, the surface usually has to be tilted above a critical angle of approximately 10°. By contrast, droplets of nearly any liquid "slip" on lubricant-infused textured surfaces - so termed slippery surfaces - when tilted by only a few degrees. The mechanism of how the lubricant alters the static and dynamic properties of the drop remains elus...

In Hard Disk Drives (HDD), it is necessary to decrease the Flying Height (FH) between the head and the disk (currently, FH is around 3-5 nm) so as to increase recording densities. Retaining the solid lubricant has become a difficult proposition owing to intermittent contact between the surfaces. ZTMD and Z are used as solid lubricant to lubricate these interfaces. In this paper, the behavior of...