Ridge and buried channel waveguides were fabricated on different substrates such as SiO2-on-Si, Si, glass wafers and Printed Circuit Boards by a sol-gel processing together with a photolithography process using photopatternable hybrid sol-gel materials. Thick sol-gel films of up to 100 microns were developed using a modified sol-gel process and ridge waveguides with vertical smooth sidewalls we...

in this research, a sol-modified composite electrodeposition technique that combines the sol-gel method with the conventional electrodeposition process was utilized to deposit ni-tio2 nanocomposite coatings. cyclic voltammetry and chronoamperometry techniques were applied to study the influence of the tio2 sol concentration on the deposits’ electrochemical behavior. the results clearly showed t...

Sol-gel derived silica possess many promising features, including low-temperature preparation procedure, porosity, chemical and physical stability. Applications exploiting porous materials to encapsulate sensor molecules, enzymes and many other compounds, are developing rapidly. In this paper some potential applications, with emphasis on biomedical and environmental ones, are reviewed. The mate...

series (11) will present the synthesis chemistry of silica sols Silica-based microporous membranes can be successfully proto make unsupported membranes with predictable pore size/ cessed by sol–gel techniques. However tailor making of such memporosity. This article aims to give a detailed account of small branes is still not possible because of the unavailability of systemangle X-ray scattering...

This work presents a novel method for direct desorption/ ionization of analytes from sol-gel-derived film. 2,5-Dihydroxy benzoic acid (DHB), a common MALDI matrix, was incorporated into a sol-gel polymeric structure. The sol-gel-derived DHB thin film can assist the mass analysis of analytes by laser desorption/ionization, with a matrix interference-free background in the mass spectra. The sol-g...

sol-gel and polymeric membrane electrodes, based on thiacalix[4]arene as a neutral carrier, weresuccessfully developed for the detection of vo2+ in aqueous solutions. the sol-gel and pvcmembrane electrodes exhibited linear response with nernstian slopes of 29.3 and 28.4 mv perdecade, respectively, within the vanadyl ion concentration ranges from 1.0 × 10-6 to 1.0 × 10-1mol dm-3 and from 1.0 × 1...

in this research zinc oxide (zno) nano-crystalline powders were prepared by sol-gel method using zinc acetate. the zno nanoparticles were characterized by x-ray diffraction (xrd), scanning electron microscopy (sem), ultraviolet-visible (uv-vis), fourier transform infra-red (ft-ir) and energy dispersive x-ray (edx) spectroscopy. the structure of nanoparticles was studied using xrd pattern. the c...

beryllium  oxide  (beo)  nanopowder  was  synthesized  using  sol-gel method  and  the  effects  of  changes of  chemical  reagents  were investigated.  because  of  tissue  equivalence  and  other  outstanding thermoluminescence  (tl) properties of  the bulk material  in x and γ dosimetry, the applicability of this nanostructure in tl dosimetry was studied  following  irradiation to  the 137 c...

this article describes the preparation and analysis of nano hydroxyapatite (ha) films on stainless steel 316l through sol-gel technique. the process started with preparation of a nitrate and phosphate sol. after aging the sol for 24 h at room temperature a ss316 substrate was dip-coated and heat-treated at 350 to 450 °c for different times in air. the coating phase and structure on substrate we...

in this paper, labo3 perovskite type catalyst formulations were prepared by sol-gel auto combustion method using citric acid as the fuel. activity of catalysts was tested in catalytic oxidation of toluene as a model of volatile organic compounds. lacoo3 perovskite formulation showed the highest activity among labo3 (fe, mn and co) perovskite catalysts. so, lacoo3 perovskite based catalyst was s...