The slurry erosion behaviour of laser clad Fe–Cr–B–Si alloy coatings was investigated at impact angles from 30u to 90u with an increment of 15u, and compared with the slurry erosion behaviour of two laser clad carbide coatings and a non-coated substrate made of AISI 4140 steel. The Fe–Cr–B–Si alloy coatings had slurry erosion resistance. Their overall slurry erosion resistance at impact angles ...

Based on a global kinetics of direct dimethyl ether (DME) synthesis process from syngas, a steady-state one-dimensional mathematical model for the bubble column slurry reactor (BCSR) has been established. It was built on the assumption of plug flow of gas phase, sedimentation-dispersion model of catalyst grains and isothermal chamber regardless of reaction heats and rates for the design of an i...

Swine manure slurries were ozonated at a dosage of 1 g/L and tested for their toxicity to the house fly (Musca domestica). The observed toxicity of ozonated swine manure was consistent and independent of origin of the swine manure. A dose (dilution) response curve was performed. A 50% dilution in the ozonated swine manure slurry resulted in 90% reduction in toxicity. Neither the synthetic nor o...

in the present study, a heterogeneous and homogeneous gas flow dispersion model for simulation and optimization of a large-scale catalytic slurry reactor for the direct synthesis of dimethyl ether (dme) from synthesis gas (syngas) and co2, using a churn-turbulent regime was developed. in the heterogeneous flow model, the gas phase was distributed into two bubble phases including small and large...

Biomass pretreatment processes often yield slurry, a two-phase material consisting of an aqueous phase with solubilised components and a solid phase with insoluble constituents. Chemical characterisation of this material using conventional wet chemical analysis requires that the two phases be analysed separately. We have previously demonstrated near infrared (NIR) models that successfully predi...

The research was focused on the slurry-phase biodegradation of naphthalene in soil. Among ex-situ techniques, the slurry-phase technique offers the advantage to increase the availability of contaminants to bacteria. From soil samples collected on a contaminated site, the Pseudomonas putida M8 strain capable to degrade naphthalene was selected. Experiments were performed in a stirred and oxygena...

The research was focused on the slurry-phase biodegradation of naphthalene in soil. Among ex situ techniques, the slurry phase offers the advantage of increased availability of contaminants to bacteria. From naphthalene contaminated soil, a Pseudomonas putida M8 strain capable to degrade naphthalene was selected. Experiments were performed in a stirred and oxygenated reactor. In this study, the...

comaring the capability of photocatalyst nano zinc oxide process by two slurry and immobilized methods in dye acid orange 7 removal introduction everyday million liters of color wastewater are produced in different industries and cuases environmental problems. the textile industry significantly affects the environment, producing high volume of wastewater from water and chemicals used in process...

The physical and nutritional characteristics of live and killed brewer's yeast slurries and the possible toxicity of intraruminal administration of loading doses of these by-products were evaluated. Dry-matter (DM) percentages of live brewer's yeast slurry ranged from 10.5 to 29.0, and DM percentages of killed brewer's yeast slurry ranged from 14.6 to 18.5. Total crude protein (N X 6.25) percen...

Evaporative cooling is able to generate the cooling medium at a temperature approaching to the ambient wet bulb temperature. In this paper, a low-energy air conditioning strategy is proposed, which is a combination of cooled ceiling (CC), microencapsulated phase change material (MPCM) slurry storage and evaporative cooling technologies. The assessment of evaporative cooling availability and uti...