The production of tailor made high strength and high performance concrete are made by incorporating silica fume into the normal concrete and it is a routine one in the present days. The mix proportioning is intricate and the design parameters are increased due to the incorporation of silica fume in conventional concrete. The aim of this paper is to look into the different mechanical properties ...

In the present study, effect of pozzolanic material (Metakaolin and Silica fume) is studied through compressive and Flexural strength in cement concrete. Metakaolin and silica fume area used as cement replacement materials at 5%, 10% and 15% by mass keeping water–cement ratio as 0.42 Compressive and Flexural strength were observed after 7 and 28 days of curing. Silica fume is a by products resu...

The aim of the work reported in this article was to investigate the effects of medium temperature and industrial by-products on the key hardened properties of high performance concrete. Four concrete mixes were prepared based on a water-to-binder ratio of 0.35. Two industrial by-products, silica fume and Class F fly ash, were used separately and together with normal portland cement to produce t...

Silica fume (SF) and Metakaolin are cementitious materials used as admixtures to produce high strength concrete and to reduce the permeability. Also, Silica fume is used to make durable concrete structures in combination with ordinary Portland cement. In places where insufficient or poor curing concrete structures like sea shores, underground structures which undergo severe loss of compressive ...

The incorporation of silica fume into the normal concrete is a routine one in the present days to produce the tailor made high strength and high performance concrete. The design parameters are increasing with the incorporation of silica fume in conventional concrete and the mix proportioning is becoming complex. The main objective of this paper has been made to investigate the different mechani...

Different mineral admixtures of Indian metakaolin, Iranian silica fume and nanosilica were used to produce high performance mortars. Two different sands types with grain size of 0.015-4mm were mixed with type II Portland cement, polycarboxylate superplasticizer,mineral admixture with 650kg/m3 cement content and water/cement ratio of 0.35. Different amount of cement was replaced by metakaolin or...

The tensile strength of cement paste was increased by 56% and the modulus and ductility were increased by 39% by using silane-treated carbon fibers and silane-treated silica fume, relative to the values for cement paste with as-received carbon fibers and as-received silica fume. Silane treatment of fibers and silica fume contributed about equally to the strengthening. Silane treatment of fibers...

a r t i c l e i n f o Keywords: 1 H NMR (B) Silica fume (D) C–S–H composition (B) Density (B) 1 H NMR has been used to characterise white Portland cement paste incorporating 10 wt.% of silica fume. Samples were measured sealed throughout the hydration without sample drying. Paste compositions and C–S–H characteristics are calculated based on 1 H NMR signal intensities and relaxation analysis. T...

The new Concrete Society Publication, Cementitious Materials, CSTR74, covers the effects of cementitious materials blast furnace slag (GGBS), fly ash (FA), limestone fines and silica fume (microsilica) on the properties of concrete. This paper focuses on the effects of silica fume on all the main properties of concrete in the fresh and hardened state as defined in the publication.