OBJECTIVES This study evaluated the effect of three surface conditioning methods on the microtensile bond strength of resin cement to a glass-infiltrated zirconia-reinforced alumina-based core ceramic. METHODS Thirty blocks (5 x 5 x 4 mm) of In-Ceram Zirconia ceramics (In-Ceram Zirconia-INC-ZR, VITA) were fabricated according to the manufacturer's instructions and duplicated in resin composit...

The aim of this study was to qualitatively demonstrate surface micro-morphological changes after the employment of different surface conditioning methods on high-alumina and glassy-matrix dental ceramics. Three disc-shaped high-alumina specimens (In-Ceram Alumina, INC) and 4 glassy-matrix ceramic specimens (Vitadur Alpha, V) (diameter: 5 mm and height: 5 mm) were manufactured. INC specimens wer...

Abstract — Ceramic shell investment casting process is used to produce high quality metal products with relatively close dimensional tolerances. The refractory primary slurry that is applied to the surface of the pattern assembly, to pick up its surface details plays a very important role in ceramic shell investment casting process (CSICP). It produces a smooth, acceptable surface finish of the...

The purpose of this study was to evaluate the microtensile bond strength of a repair composite resin to a leucite-reinforced feldspathic ceramic (Omega 900, VITA) submitted to two surface conditionings methods: 1) etching with hydrofluoric acid + silane application or 2) tribochemical silica coating. The null hypothesis is that both surface treatments can generate similar bond strengths. Ten ce...

In this paper nuclear techniques were used to describe the structural characteristics of ceramic samples. These samples were produced mainly with silica to simulate sandstones. Three sets of samples with different characteristics were analyzed using gamma ray transmission to obtain point by point porosity and X-ray microtomography to obtain the porosity, for 2D sections and the scanned bulk, as...

O This in vitro treatments, 3 luting agents and thermocycling on microtensile bond strength (μTBS) to zirconia ceramic. Material and Methods: A total of 18 blocks (5x5x4 mm) were fabricated from zirconia ceramic (ICE Zirkonia) and duplicated into composite blocks (Alphadent). Ceramic blocks were divided into 3 groups (n=6) according to the following surface treatments: airborne-particle abrasio...

This is a review of acid aluminum phosphate for the binding and coating of materials. The acid aluminum phosphate in the form of a solution obtained by dissolving aluminum hydroxide in phosphoric acid, with a P/Al molar ratio of 23, is effective for the binding of fibrous or particulate materials. Porous ceramic articles are made using this binder by wet forming, followed by heat treatment. The...

objectives: this study aimed to evaluate the effect of different ceramic surface treatments after machining grinding on the biaxial flexural strength (bfs) of machinable dental ceramics with different crystalline phases. materials and methods: disk-shape specimens (10mm in diameter and 1.3mm in thickness) of machinable ceramic cores (two silica-based and one zirconia-based ceramics) were prepar...