Oxide-supported amine materials are widely known to be effective CO2 sorbents under simulated flue-gas and direct-air-capture conditions. Most work has focused on amine species loaded onto porous silica supports, though potential stability advantages may be offered through the use of porous alumina supports. Unlike silica materials, which are comparably inert, porous alumina materials can be tu...

This research studies the utilization of alumina waste and silica waste for geopolymer production. Alumina waste was obtained from aluminium thermal metallurgy industry, silica waste was obtained from silicone recycle industry in Thailand. This present study aimed at investigating the basic physical and chemical properties of waste materials and also the optimal proportion in geopolymer product...

The aim of this study was to qualitatively demonstrate surface micro-morphological changes after the employment of different surface conditioning methods on high-alumina and glassy-matrix dental ceramics. Three disc-shaped high-alumina specimens (In-Ceram Alumina, INC) and 4 glassy-matrix ceramic specimens (Vitadur Alpha, V) (diameter: 5 mm and height: 5 mm) were manufactured. INC specimens wer...

Five types of nanofillers, namely, silica, surface-silylated silica, alumina, surface-silylated alumina, and boron nitride, were tested in this study. Nanocomposites composed of an epoxy/amine resin and one of the five types of nanoparticles were tested as dielectrics with a focus on (i) the surface functionalization of the nanoparticles and (ii) the water absorption by the materials. The dispe...

The dispersion and coordination of aluminium species on the surface of silica-alumina based materials are essential for controlling their catalytic activity and selectivity. Al and Al are two common coordinations of Al species in the silica network and alumina phase, respectively. Al is rare in nature and was found hitherto only in the alumina phase or interfaces containing alumina, a behavior ...

Five types of nanofillers, namely, silica, surface-silylated silica, alumina, surface-silylated alumina, and boron nitride, were tested in this study. Nanocomposites composed of an epoxy/amine resin and one of the five types of nanoparticles were tested as dielectrics with a focus on (i) the surface functionalization of the nanoparticles and (ii) the water absorption by the materials. The dispe...

Thirteen different cement-clinker crystalline phases present in the lime-silica-alumina system have been systematically modeled using a simple and general force field. This constitutes a new type of approach towards the study of lime-silica-alumina systems, where the simpler and more transferable Lennard-Jones potential was used instead of the more traditional Buckingham potential. The results ...

Deposition of CH3ReO3 onto the surface of dehydrated, amorphous silica-alumina generates a highly active, supported catalyst for the metathesis of olefins. However, silica-alumina with a high (10 wt %) Re loading is no more active than silica-alumina with low (1 wt %) loading, while CH3ReO3 on silica is completely inactive. Catalysts prepared by grafting CH3ReO3 on silica-alumina contain two ty...

This second paper in a series describes the relationship between grain growth kinetics and grain boundary complexions in silicadoped alumina. Dense high-purity silica-doped alumina samples were annealed for various times in the temperature range of 13001 and 19001C and their grain growth behavior was quantified. Four different grain boundary complexions were observed in silica-doped alumina, al...

Alumina or silica gel are used as catalysts for a solvent-free oxidation of benzoins to the corresponding benzils. These catalysts are easily recovered after completion of the reactions, which are carried out either by heating in a sand bath or using microwave irradiation. Comparison of the results obtained with both catalysts indicates that all the reactants examined were oxidized faster on al...