Substrate noise generated by digital circuits on mixed-signal ICs can disturb the sensitiveanalog/RF circuits, such as Low Noise Amplifier (LNA), sharing the same substrate. This paperinvestigates the adverse impact of the substrate noise on a high frequency cascode LNA laid out on alightly doped substrate. By studying the major noise coupling mechanisms, a new and efficientmodeling method is p...

floorplanning is an important step in physical design of vlsi circuits. it is used to plan the positions of a set of circuit modules on a chip in order to optimize the circuit performance. however, modern floorplanning takes better care of providing extra options to place dedicated modules in the hierarchical designs to align circuit blocks one by one within certain bounding box for helping seq...

In this paper, a model for MEMS capacitive microphone is presented for integrated circuits.  The microphone has a diaphragm thickness of 1 μm, 0.5 × 0.5 mm2 dimension, and an air gap of 1.0 μm. Using the analytical and simulation results, the important features of MEMS capacitive microphone such as pull-in voltage and sensitivity are obtained 3.8v and 6.916 mV/Pa, respectively while there is no...

Traveling Wave Tubes (TWTs) consist of different elements. The most important element of TWT is the RF circuit. RF circuits in helix TWTs need a dielectric support to hold the helix; this support also has an effect in electromagnetic properties of RF circuits. A novel dielectric support is proposed to reduce the second harmonic of helix TWTs. The dielectric support in this structure consists of...

This paper addresses an approximation-based anti-windup (AW) control strategy for suppressing the windup effect caused by actuator saturation nonlinearity in proportional–integral–derivative (PID) controlled systems. The effect of actuator constraint is firstly regarded as a disturbance imported to the PID controller. The external disturbance can then be modeled by a linear differential equatio...