The paper attempts to study the machinability issues of aluminium-silicon carbide (Al-SiC) metal matrix composites (MMC) in turning using HSS cutting tool. SiCp-reinforced metal matrix composites (MMCs) containing SiC particles (5wt%-20wt %) of 400mesh size were prepared by powder metallurgy (P/M) route and used as work material for turning. Experiments were conducted at various cutting speeds ...

Metal matrix composites have been increasingly used as materials for components in automotive and aerospace industries because of their improved properties compared with non-reinforced alloys. During machining the selection of appropriate machining parameters to produce job for desired surface roughness is of great concern considering the economy of manufacturing process. In this study, a surfa...

Metal matrix composites have been widely used in industries, especially aerospace industries, due to their excellent engineering properties. However, it is difficult to machine them because of the hardness and abrasive nature of reinforcement elements like silicon carbide particles (SiCp).In the present study, an attempt has been made to investigate the influence of spindle speed (N), feed rate...

In this work, a novel processing method called powder thixoforming was proposed to prepare composites reinforced with 50 vol % of SiC particles (SiCp) that were used for electronic packaging in order to investigate the effects of remelting duration on its microstructure and properties. Optical Microscope (OM), Scanning Electron Microscope (SEM), X-ray Diffraction (XRD) and Transmission Electron...

Metal matrix composites (MMCs) are among the very important engineering materials by which the combinations of various properties can be achieved. The MMCs have the great potential for use in automobile and aerospace industries for possessing high strength, stiffness and hardness. The reinforcement types used in the composites are continuous, discontinuous, short, whiskers and particles. The at...

The objective of this work is to investigate the effects of current, pulse on time and pulse off time in Electro Discharge Machining performance on material removal rate and tool wear rate of Mg/SiCp metal matrix composites. In this work the Mg/SiCp metal matrix composite specimens were prepared by powder metallurgy route. ELEKTRA PLUS spark erosion machine was used for the purpose. Brass tool ...

Article history: Received 28.3.2013 Received in revised form 26.4.2013 Accepted 29.4.2013 Aluminum matrix composites containing 55% SiC particle reinforcing phase/SiC reinforcement phase particle and Kovar alloy 4J29 were chosen as the base metals. After nickel plating on the surface of SiCp/Al, two kinds of materials were soldered together by using Zn-Cd-Ag-Cu as the filler metal and ZnCl2 as ...

Article history: Received: 4.9.2015. Received in revised form: 1.12.2015. Accepted: 2.12.2015. This research paper deals with the joining of different materials such as SiCp/6063Al MMCs and Fe-Ni alloys by means of vacuum brazing with active filler metal Ag47-Cu18-In17-Sn17-Ti1. With the optimal process parameters, i.e., brazing temperature 580 °C, soaking time of 30 min and vacuum degree of 6....

metal matrix composites have been widely used in industries, especially aerospace industries, due to their excellent engineering properties. however, it is difficult to machine them because of the hardness and abrasive nature of reinforcement elements like silicon carbide particles (sicp).in the present study, an attempt has been made to investigate the influence of spindle speed (n), feed rate...

Thermal shock property of the material can be improved by improving fracture property of the material. In this paper, factors affecting fracture property have been studied and the effect of residual stress, microstructure, strain rate and stress concentration on fracture property of material has been analyzed, which may provide help for improving thermal shock property of material. Thermal shoc...