Silicon carbide (SiC) is widely used to improve the non-linear conductivity of resistive field grading composite. In this paper, SiC nanoparticles are modified into core-shell with silica (SiO2) coating on surface and characterised by transmission electron microscopy X-ray diffraction, respectively. The 7 wt% [email protected]2/epoxy nanocomposite then prepared, pure epoxy SiC/epoxy prepared as...

abstract: in this study, al 2 o 3 –sic nanocomposites have been fabricated by mixing of alumina powder containing 0.05% weight magnesium oxide and silicon carbide nano powders, followed by hot pressing at 1650 0 c. the mechanical properties of al 2 o 3 -sic nanocomposites containing different volume fraction (2.5, 5, 7.5, 10 and 15%) of nano scale sic particles were investigated and compared wi...

Silicon carbide (SiC) has been prepared successfully using concentrated solar energy provided by the IER-UNAM solar furnace. This has led to the development of a low CO2 emissions process for the production of this material via carbothermic reduction of a silica/carbon (SiO2/C) nanocomposite, which has shown a more reactive carbon for formation of composite, being more thermally stable. Silica ...

Spark plasma sintering (SPS) is a sintering process that is capable of sintering hard worked powders in short times. This technique was used to fabricate bulk Cu and Cu-SiC nanocomposites. Pure Cu and mixed powders of Cu including 4 vol% of SiC nanoparticles were mechanically alloyed for 25 h and sintered at 750˚C under vacuum condition by SPS method. Microstructures of the materials were chara...

In this paper, AA5250 aluminum sheets are reinforced with boron nitride (BN), silicon carbide (SiC), oxide (Al2O3), and vanadium (VC). The nanocomposites metal matrix manufactured using friction stir processing (FSP). A novel analytical comparison based on an assessment of mechanical, physical properties the cost materials was conducted to help engineers designers choose most economically feasi...

In this research the influence of adding SiC on microstructure and electrical properties of ZnO-based Nanocomposite varistors were investigated. SiC was added with amounts of 10-0 mass% to ZnO-based varistor composition. It is found that SiC allows reaching to high threshold voltage with formation of fine-graine...

We have fabricated tungsten-diamond-like-nanocomposite (W-DLN) Schottky contacts on n-type and p-type 6H SiC (Si-face). The as-deposited n-type and ptype contacts are rectifying and measurement results suggest that the electrical characteristics are dominated by the properties of the tungsten SiC interface. The n-type contacts have a reverse leakage current density of 4.1 x 10 -3 Acm -2 and the...

In this study, the procedure of sintering and heat treatment of Al2O3-SiC-MgO nanoceramic was considered. For improving the densification behavior and mechanical properties, experimental variables, such as sintering temperature and duration, which significantly influence the fracture performance of this nanocomposite body, were optimized. To obtain desired properties, several tests were conduct...