introdouction: esthetic demands of patients have led to the introduction of tooth-colored restorations wherecomposite resins are bonded to the enamel using acid etch techniques. total etch adhesion systems are still considered as the gold standard among bonding systems. however, clinicians have a tendency to use adhesive systems with simpler application procedures. the aim of the present study ...

In this research in-plane shear Behavior of composite steel-concrete shear walls was investigated considering the Effects of steel plates thickness, spaces between shear studs, shape and type of shear studs and existing of minimum reinforcement in wall section. Several finite element models were analyzed and Numerical results of two models were taken under verification with existent experimenta...

due to the existence of fibrous materials such as plastic fragments, the strength anisotropy of municipal solid waste (msw) materials is the main source of differences between their mechanical response in direct shear and triaxial apparatus. as an extension of earlier research on the mechanical behavior of msw using a large traixail apparatus, results presented in shariatmadari et al. [1] and k...

introduction :the aim of this study was to evaluate and compare the in vitro effect of the erbium-doped yttrium aluminum garnet (er:yag) laser with different radiation distances and high-speed rotary treatment on the shear bond strength of flowable composite to enamel of human permanent posterior teeth . methods : freshly extracted human molar teeth with no caries or other surface defects were ...

geotechnical investigations of waste fills are rarely undertaken, and consequently the geotechnical community has little knowledge of their engineering properties. in this study, a geotechnical testing program was conducted to evaluate the engineering properties of old municipal solid waste sampled in whamyung msw landfill site, busan, korea. the conducted tests included water content, specific...

the aim of this study was to compare the shear bond strength (sbs) of resin modified glass ionomer (rmgi) and composite resin for bonding metal and ceramic brackets.eighty-eight human premolars extracted for orthodontic purposes were divided into 4 groups (n=22). in groups 1 and 2, 22 metal and ceramic brackets were bonded using composite resin (transbond xt), respectively. twenty-two metal and...

Effects of annealing treatment after equal channel angular pressing (ECAP) on the interface properties and shear bond strength of Al/Cu bimetallic rods were investigated. For the as-deformed samples, the one with two passes of ECAP indicated higher shear bond strength. Formation of a layer of intermetallic compounds after annealing treatment is confirmed. In general, by increasing annealing tem...

The joint surface is widely distributed in the rock, thus leading to the nonlinear characteristics of rock mass strength and limiting the effectiveness of the linear model in reflecting characteristics. The JRC/JCS model is the nonlinear failure criterion and generally believed to describe the characteristics of joints better than other models. In order to develop the numerical program for JRC/...

the purpose of this study was to evaluate the shear bond strength (sbs) of orthodontic brackets bonded with two types of nano-composites in comparison to a conventional orthodontic composite.sixty extracted human first premolars were randomly divided into 3 groups each containing 20 teeth. in group i, a conventional orthodontic composite (transbond xt) was used to bond the brackets, while two n...