In this paper we give the new improved analytical method of triple stub tuner for matching load impedances to provide maximum power transfer between a generator and load. The stubs are connected in series with line at appropriate distances from characteristic transmission stabs different. points on determination length first near limit lengths second found which is possible. third directly obta...

In this paper, a new type of steel-concrete composite member, concrete-filled core steel tube with outer angle steel plank reinforced concrete stub column, is proposed and a series of nonlinear 3D(three-dimensional) full-range numerical calculations under axial compression are carried out, some important factors are analyzed, such as the strength of the concrete, the steel tube and the angle st...

This paper compares a stub and a decoupling capacitor for power supply noise reduction. A quarter-length stub attached to the power supply line of an LSI chip works as a band-eliminate filter, and suppresses the power supply bounce of the designed frequency. The conditions where the stub is more effective than the same-area decoupling capacitor are clarified. The stub will work more efficiently...

base types in any byte order. USC requires stub parameters that give the lengths of any variable length array arguments. The code below copies one variable length character array to another. len gives the current length of the arrays. void foo (len, str1, str2) int len; /* Must be a native type */ char str1[len]; /* May be native or not */ char str2(1, 4, 4, <0>)[len];/* May be native or not */...

A novel circular micro strip dual band stub loaded antenna is described. The antenna is built with a dielectric constant of (?r =2. 33) with RT/5870 as the substrate material. Due to the effect of stub loading, dual frequency is produced at 1. 88 GHz and 2. 73 GHz respectively for the stub length=17 m. m. With the further increment of stub length, shifting of secondary resonant frequency is pos...

The use of a stub code generator can greatly reduce the effort required to implement a multi-server system on top of a microkernel. However, stub code has traditionally been highly generic and therefore rather slow, which has prevented it from being used in performance-critical applications. In this work, we show that this restriction can be eliminated by specialization for the underlying platf...

Recently, a new way of avoiding crossings in straight-line drawings of non-planar graphs has been investigated. The idea of partial edge drawings (PED) is to drop the middle part of edges and rely on the remaining edge parts called stubs. We focus on a symmetric model (SPED) that requires the two stubs of an edge to be of equal length. In this way, the stub at the other endpoint of an edge assu...

A 1 GHz Double Data Rate 2/3 (DRR2/3) combo Stub Series Terminated Logic (SSTL) driver has been developed for the first time to our knowledge using a 90 nm CMOS process. To satisfy the signal integrity requirements the driver strength is dynamically calibrated and the input/output port is efficiently terminated by on-die resistors. Furthermore, the slew-rate can be sufficiently controlled by se...

The purpose of this paper is to design and fabrication of an annular ring slot patch antenna with short stub (ARSPA) for mobile applications Digital Cellular System (DCS) (1.711.88) GHz, Personal Cellular System (PCS) (1.85 -1.99) GHz, and Universal Mobile Telecommunications System (UMTS) (1.71-2.17) GHz. Return loss and bandwidth are studied with respect to short stub location. By using short ...

The multi-band microstrip antennas are realized by cutting more than one slots at an appropriate position inside the patch or by placing the open circuit stub on the edges of the patch or by using the combination of slots and stub. In this paper, an analysis to study the multi-band response in stub loaded two half U-slot cut rectangular microstrip antenna is presented. The first half U-slot in ...