Whenever a tuned-mass damper is attached to a primary system, motion of the absorber body in more than one degree of freedom (DOF) relative to the primary system can be used to attenuate vibration of the primary system. In this paper, we propose that more than one mode of vibration of an absorber body relative to a primary system be tuned to suppress single-mode vibration of a primary system. W...

Structural vibration mitigation using semiactive control strategies has received special attention recently due to the attractive properties of semiactive devices. The main restriction of a semiactive device is that it can only produce dissipative forces, which may be expressed in mathematical terms as a nonlinear inequality constraint. Standard active control algorithms do not generally accoun...

In this article, the H∞ optimization design of a hybrid vibration absorber (HVA), including both passive and active elements, for the minimization of the resonant vibration amplitude of a single degree-of-freedom (SDOF) vibrating structure is derived by using the fixed-points theory. The optimum tuning parameters are the feedback gain, the tuning frequency, damping and mass ratios of the absorb...

This paper presents a reduce roll vibration of the full vehicle model with passive suspension systems using vibration absorber to change the dynamic system matrix stat’s eigenvalue. Since using the controller system has been splurged and required to energy consuming, in this research the vehicle body roll vibration has been reduced and supplied vehicle stability using a vibration absorber for t...

The main objective of this article is to present the semi-active vibration control using an electro-rheological fluid embedded sandwich structure for a cantilever beam. ER fluid is a smart material, which cause the suspended particles polarize and connect each other to form chain. The stiffness and damping coefficients of the ER fluid can be changed in 10 micro seconds; therefore, ERF is suitab...

A novel active electromagnetic vibration absorber (AEMVA) is developed. It is shown that for suppression of steady-state response to a harmonic excitation, a proportional and derivative feedback control is equivalent to a time-delayed control. The study of the stability issue focuses on a conflicting goal of achieving the marginal stability of the time-delayed vibration absorber and the stabili...

The nonlinear two-degree-of-freedom system under consideration consists of the linear oscillator with a relatively big mass, which is an approximation of some continuous elastic system, and of the vibro-impact oscillator with a relatively small mass, which is an absorber of the linear system vibrations. Analysis of nonlinear normal vibration modes shows that a stable localized vibration mode, w...

Vibration is omnipotent, universal and multifaceted phenomena. It is an interdisciplinary field where physicist, mathematician and engineer interact in a closed loop. Vibration absorption is a method of adding a tuned springmass absorber to a system to create anti-resonance at a resonance of the original system. Most real-world phenomena exhibit nonlinear behavior. In these paper overviews of v...

Abstract   In vibratory systems, linear and nonlinear vibration absorbers can be used to suppress the primary and super-harmonic resonance responses. In this paper, the behavior of a nonlinear system with a nonlinear absorber, under the primary and super-harmonic resonances is investigated. The stiffnesses of the main system and the absorber are cubically nonlinear and the dampers are linear. M...

recently, a large amount of studies have been related to nonlinear systems with multi-degrees of freedom as well as continuous systems. the purpose of this paper is to optimize passive vibration absorbers in linear and nonlinear states for an euler-bernoulli beam with a nonlinear vibratory behavior under concentrated moving load. the goal parameter in the optimization is maximum deflection of t...