A series of experiments was conducted to investigate the erosion behaviors of the noncohesive sediments downstream of smooth and rough aprons. A total of 33 tests were carried out with five different roughness conditions (k =0, 1, 1.85, 3.35 and 5mm) in a flume 0.5m wide, 0.6m deep and 9m long. For each run, s measurements were taken of the scour-hole profiles at the asymptotic or equilibrium s...

A theoretical investigation of local scour downstream of grade-control structures based on two-dimensional jet diffusion and particle stability is experimentally verified. Turbulent jet diffusion reduces fluid velocity near the bed particles and equilibrium scour is obtained when noncohesive bed particles cannot be removed from the scour hole. Equilibrium scour depth is written as a function of...

This study addresses the design of riprap aprons as a scour countermeasure near abutments under clear-water conditions. It deals with the lateral extent of riprap aprons and the geometry of the scour hole prevailing at the apron edge. The study applies to riprap aprons acting as granular filters. The scour depth appears to be independent for a sufficiently long relative abutment length. Scour h...

Scour in bed material downstream weirs is considered the most unfavorable process which threats the overall stability of the weir. Weirs with oblique angle in the horizontal plan will affect the scour profile downstream the structure and may reduce it. The objective of this paper is to investigate the effect of oblique weir angle on the scour profile. Furthermore, the effect of V-notch angle on...

Two sets of experiments related to the scour of cohesionless sediment by planar turbulent jets are presented and discussed. The first set of experiments measures the growth of the scour hole and downstream dune as a function of time. Measurements reveal a bedform that is nearly self-similar and whose growth in time is governed by a power-law relationship. The bedform is well represented by thre...

Severe foundation scour may occur around monopile foundations of offshore wind turbines due to currents and waves. The so-called p-y curves method is suggested in the existing design recommendations to determine the behavior of monopiles unprotected against scour and the reduction of effective soil stress is accounted for by the extreme scour depth. This conservative design approach does not co...

The effect of a combined system of the bed suction and jet injection as a pier-scour countermeasure on the turbulent flow field is studied in a laboratory flume using an Acoustic Doppler Velocimeter (ADV). The three components of the velocities in the vertical symmetry plane in the equilibrium scour hole in front and rear of the pier under 3-jet injections and bed suction rate Qs/Q0 = 2%located...

local scouring around bridge piers is a natural phenomenon caused by the erosive process of flowing stream on alluvial beds. the 3d flow field around bridge piers interacting with the bed materials increases complexity of local scour process. the local scour depth develops in accelerated flows and if it is not predicted correctly, the bottom level of local scour hole will exceed the original le...

Base-level fall in river beds occurs due to varying natural or unnatural causes. Base-level fall causes the change in the behavior of flow at the location of drop in base-level. In such situations, most of scour occur at the foot of the slope, and slope wall retreats in the upstream direction. This phenomenon widens the wall of the river bank, thus leading to its destruction. The amount of bed ...

spur dike is an important element for protection of river banks. spur dike causes variations in flow field, sediment transport and bed topography. the mechanism of flow and sediment transport in a channel bend is very complex, especially when a spur dike is constructed in a bend. in this paper the time variations of dimension of the scour hole and the bed’s topography were considered around a t...