Composite specimens were prepared by dispersion of various amounts of nano-sized Al2O3 fillers in a monomer system containing 60% Bis-GMA and 40% TEGDMA. For comparative purposes, composite samples containing micrometer size Al2O3 fillers were also prepared following the same procedure. The mechanical properties of the lightcured samples were assessed by three-point flexural strength, diametral...

This paper reports quantitative mechanical characterization of silicon carbide (SiC) nanowires (NWs) via in situ tensile tests inside scanning electron microscopy using a microelectromechanical system. The NWs are synthesized using the vapor-liquid-solid process with growth direction of ⟨111⟩. They consist of three types of structures, pure face-centered cubic (3C) structure, 3C structure with ...

nanocomposite composed of organoclay(cloisite 20a-c20a) and poly lactic acid (pla) was prepared by solvent casting method. physical, mechanical, thermal, barrier and microstructure properties of the composite were studied. x-ray diffraction (xrd) patterns and scanning electron microscopy (sem) images revealed that the diffraction peak of nanoclay shifted to lower angles and the d-spacing betwee...

To investigate the effect of tempering treatment on mechanical properties and the microstructure of DIN 1.4021 Martensitic Stainless Steel, austenite treatment was conducted for the samples at 1000 ºC temperature for 60 min and then the samples were oil quenched. Later, tempering treatments were performed for the samples at 500 ºC and 700 ºC temperatures for 2 and 5 h, respectively; then quench...

The performance of components produced by conventional route of a thermo mechanical process and those produced by continuous casting is interesting from different aspects of economy and technology. The performance of products in their service depends on their properties which are strongly influenced by production routes. In the present work the hardness, tensile and tensile-impact behaviors of ...

the incorporation of boehmite nano-particles and its effects on the mechanical properties and bond strength of an experimental dental adhesive were studied.an adhesive solution containing ethanol, bis-gma, tmptma, hema and photo-initiator system (camphorquinone and dmaema) was prepared. silanized boehmite nano-particles were incorporated into the adhesive in different concentrations of 0, 0.2, ...

severe plastic deformation (spd) methods were developed for producing of metals and alloys with ultrafine grained (ufg) microstructures having high strength. parallel tabular channel angular pressing (ptcap) as a noble severe plastic deformation (spd) method was used to produce ultrafine grained (ufg) and nanostructured cu-30%zn tubes. in this paper, the effect of ptcap process temperature on t...