A displacement finite element method for analyzing a beam on continuous elastic foundation is presented. A three-dimensional model which accounts for the effects of both the Filonenko-Borodich and Pastemak foundation models in a consistent and complete way is used. A variational principle is introduced with the slope field due to bending only and the displacement field approximated by independe...

This study presents a new approach for physical and material modeling of space frame-raft-soil system. The physical modeling consists of a modified Thimoshenko beam bending element with six degrees of freedom per node to model the beams and columns of the superstructure, a modified Mindlin's plate bending element with five degrees of freedom per node to represent the structural slabs and raft, ...

Laser forming as a springback-free and noncontact forming technique has been under active investigation over the last decade. Previous investigations are mainly focused on forming of large and thick workpieces using high power lasers, with less work on precision, micro-scale bending of small and thin sheets. In this work, a 4 W continuous wave argon ion laser is used as the energy source, and t...

This article proposes a method to estimate the axial force in a bar based on local vibration measurements. The method assumes Timoshenko beam theory and in addition accounts for the rotational inertia of the bar and the mass of the sensors. A major advantage of the proposed method is its generality. Assuming at least five sensors along the length of the bar, no information on the connection of ...

Abstract: A finite element model is verified accurate enough to simulate the static test of one reinforced-concrete frame with specially shaped columns subjected to the loss of a ground corner column. As the frame sustained loads primarily depending on the beam resisting mechanism in the test, four related parameters, namely the height of beam section, rebar ratio of beam, rebar ratio of slab a...

in this work, laser bending of perforated sheets has been investigated numerically. laser bending of perforated sheets is more complicated than non-perforated sheets due to their complex geometries. in this paper, laser bending of perforated sheets is studied numerically in the form of thermo-mechanical analysis with abaqus/implicit code. for this purpose, the effects of process and sheet param...

Out-of-plane and in-plane free vibrations of angle-ply and cross-ply laminated composite beams with different boundary conditions are studied. The effect of fiber angle on out-of-plane bending, torsional, in-plane bending, and axial natural frequencies are investigated separately. The beam is modeled and analyzed by the finite element method (FEM). The finite element software package ANSYS is u...

In this paper, a bio-inspired bending actuator was designed and fabricated using piezoelectric patches and cantilever-shaped beam for controlling nose shape. The aim of this study is to investigate the use of the bending actuator. PZT and single crystal PMN-PT actuators were used to generate translational strain and shear stress. The piezoelectric patches were attached on the clamped cantilever...

A constitutive equation for nonlinear viscoelasticity is used to model the mechanical response of solid polymers such as polycarbonate. The nonlinearity arises from a reduced time which causes stress relaxation to accelerate with increasing strain. The constitutive equation can account for the occurrence of yield in a homogeneous uniaxial constant strain rate test. The constitutive equation is ...