This paper investigates the effects of process parameters on weld bead width of austenitic stainless steel SS-310 in tungsten inert gas welding. The four parameters namely welding current, type of gas, gas flow rate and included angle of weld plates during butt joint were varied at three levels. The DOE approach was used to design experimental conditions. Orthogonal array L9 was used for carryi...

In general, it is desirable to finish the weld quickly, before a large volume of surrounding metal heats up and expands. The welding process used, type, welding current and speed of travel, thus, affect the degree of shrinkage and distortion of a weldment. The use of mechanized welding equipment reduces welding time, metal affected zone and consequently distortion. This article helps to define ...

In the present study, the three components of the residual leakage magnetic fields from the flaws were measured with the MI sensor. Furthermore, finite element analysis for the three components of the residual magnetic fields was carried out. From these experimental and analytical results, By showed the two pairs of the maximum and the minimum and can evaluate the flaw length. In the case of th...

The anisotropic, heterogeneous and coarse granular structures of austenitic stainless steel welds lead to important disturbances of the ultrasonic propagation: beam skewing and splitting, attenuation, backscattering and spurious echoes. These disturbances have been studied by EDF R&D for a few years in order to improve the ultrasonic NDT in nuclear applications. In particular, a methodology for...

Process monitoring is important for the laser welding system, especially for the weld seam deviation monitoring. A 10kW high power fiber laser butt joint welding of type 304 stainless steel was performed. By combing two different band pass filters, high speed photography was employed to capture the near-infrared images of molten pools. Image difference algorithm was used to obtain the weld seam...

Impact toughness of a gas tungsten arc welded Ti /6Al /4V alloy butt-joint was evaluated at room temperature using standard Charpy V-notch specimens. The Charpy specimens were prepared with notch roots located either in the parent metal, in the heataffected zone (HAZ), or in the weld metal. Optical metallography and Vickers microhardness test showed that the weld metal has the coarsest grains a...

Received: 17/08/2013 Abstract This paper was aimed to report the 3D finite element analysis simulation of laser welding process of Ti6Al4V 1.7 mm sheets in butt joint in order to predict the temperature distribution, hardness, and weld geometry. The buttjoint welds were made using CO2 laser with the maximum power of 2.2 kW in the continuous wave mode. A part of the experimental work was carried...

The MIG welding is one of the most popular welding techniques used in industries. This uses a consumable metal electrode. The input parameters in MIG welding play a significant role in deciding the weld quality, strength, cost and speed. Most of times manufacturer faces a problem to select optimum process parameters for a good quality weld. This paper tries to present the effect of different we...

I. Abstract: The prediction of the optimal weld bead width is an important aspect in shielded metal arc welding (SMAW) process as it is related to the strength of the weld. This paper focuses on investigation of the development of the simple and accurate model for prediction of weld bead width of butt joint of SMAW process. Artificial neural networks technique was used to train a program in C++...

Tungsten Inert Gas (TIG) welding is a widely applied manufacturing process. Angular distortion is a major problem and most pronounced among different types of distortion in the butt welded plates. This angular distortion is mainly due to nonuniform transverse shrinkage along the depth of the plates welded. Restriction of this distortion by restraint may lead to higher residual stresses. However...