this study evaluates two different types of techniques for concrete hollow-block sections reinforced with traditional steel rebars and wire meshes, and compares their structural behaviour to that of an ordinary reinforced concrete beam section. the comparisons are based on the responses both before and after they were repaired with glass fibre reinforced polymers (gfrp). the specimens were subj...

Polypropylene Fiber Reinforced Concrete is an embryonic construction material which can be described as a concrete having high mechanical strength, Stiffness and durability. By utilization of Polypropylene fibers in concrete not only optimum utilization of materials is achieved but also the cost reduction is achieved. This paper presents a comprehensive review on various aspects Polypropylene F...

Corrosion of steel reinforcement is one of the most prevalent causes of reinforced concrete (RC) structures deterioration in chloride-contaminated environments. As a result, evaluating the impact of any possible corrosion-induced damages to reinforced concrete bridges strongly affects management decisions: such as inspection, maintenance and repair actions. The corrosion propagation phase is a ...

In reinforced concrete design, there are situations where transfer of shear across a specific plane needs to be considered. Examples of such situation include corbels, bearing shoes, ledger beam bearing, and a host of connection between precast concrete elements. In this study, the shear transfer behavior of reinforced concrete is investigated experimentally by conducting test on 6 precracked p...

An experimental study is conducted on three ½ scales, single-story, single-bay, frame specimens. The first specimen was a reinforced concrete frame with solid-brick infill. The second specimen was a reinforced concrete frame with hollow clay perforated-brick infill. The last specimen was a reinforced concrete frame without any infill. These three specimens were tested by pseudostatic method. Di...

ABSTRUCT: Recently, in the attention in response to global warming issues and sustainable society, the manufacturing using natural materials has become actively. Bamboo, low cost, fast growing, and broad distribution of growth, is expected to contribute significantly to earthquake-resistant construction and seismic retrofit technology in the developing countries. The authors also have been stud...

the use of polymer composite (frp) as a reinforcement material for the repair and strengthening of important components of reinforced concrete structures, particularly columns, has found wide spread. in this study, the effect of intermediate layer on improving the confinement behavior of reinforced concrete columns has been investigated. to achieve the objectives of the study, 14 cylindrical re...

in reinforced concrete design, there are situations where transfer of shear across a specific plane needs to be considered. examples of such situation include corbels, bearing shoes, ledger beam bearing, and a host of connection between precast concrete elements. in this study, the shear transfer behavior of reinforced concrete is investigated experimentally by conducting test on 6 precracked p...

The addition of steel fibers into concrete improves the postcracking tensile strength of hardened concrete and hence significantly enhances the shear strength of reinforced concrete reinforced concrete beams. However, developing an accurate model for predicting the shear strength of steel fiber reinforced concrete (SFRC) beams is a challenging task as there are several parameters such as the co...

Abstract: A new reinforced SFRFLC (abbr. steel fiber reinforced full-lightweight concrete) superposed beam was proposed to sufficiently utilize the good peculiarities of ordinary concrete in compression and SFRFLC in tension, and reduce its self-weight. Experimental study was carried out on the flexural behaviors of reinforced SFRFLC superposed beams compared with reinforced concrete beams and ...