Indentat~on technque was used to characterize the mechanical properties (elastic modulus, hardness and toughness) both of PVD coatmgs and autocatallt~c chem~cal deposition ones. TIN and TiCN films m ere respectively depos~ted on a duple.: s t adess steel substrate using PVD technque. moreover a Nip films (P content about 8O6) and a NIPIB,C composite ones were used as comparison materials The ef...

Since the introduction of electron beam (EB) physical vapour deposition (PVD) thermal barrier coatings (TBCs) and their application to moving components in the hot gas stream, erosion has become a prime concern. EB PVD TBCs, due to their unique columnar microstructure are far more strain tolerant than their plasma sprayed (PS) counter parts and can thus be used under more exacting operating con...

The development of new cutting tool materials during the last few years is based mainly on submicron hardmetal substrates as well as on new PVD and CVD coatings. The development of submicron and nanopowders with higher strength and higher fracture toughness solves problems in machining high-temp alloys, hard materials, and in dry cutting. Based on physical models used to calculate stress in the...

This paper is a review on the status of hard coating of various physical vapour deposition (PVD) techniques and compare their properties. The use of hard and wear resistant PVD coatings on cutting tools is now widespread in global manufacturing for reducing production cost and improving productivity, all of which are essential if industry is to remain economically competitive. The review includ...

in this study, physical vapor deposition (pvd) ti-cr-n coatings were deposited at two different temperatures100 and 400ºc on hardened and tempered tool steel substrates. the influence of the applied deposition temperature on the physical and mechanical properties of coatings such as roughness, thickness, phase composition, hardness and young’s modulus were evaluated. phase compositions were stu...

TiAlB coatings with different compositions were deposited by co-sputtering from TiAl and TiB2 targets onto AISI316 stainless steel substrates at a temperature of 170(C. The stoichiometry and nanostructure have been studied by x-ray photoelectron spectroscopy (XPS), x-ray diffraction (XRD) and transmission electron microscopy (TEM). Analysis of the XPS spectra suggests the presence of phases in ...

Thermal barrier coatings (TBCs), consisting of physical vapor deposited (PVD) partially stabilized zir-conia (PSZ, 8 wt. %Y203) and a diffusion aluminide bond coat, were characterized as a function of time after oxidative isothermal heat treatment at 1373 K in air. The experimental characterizations was conducted by X-ray diffraction analysis and scanning electron microscopy (SEM) with energy-d...

AbstractSputtered MoS2 coatings have been mostly used as a solid lubricant. In this investigation, MoSx/Ni composite coatings with Ni contents varying from 0 to 22 % were deposited onto steel substrate using a DC magnetron sputter process. The MoS2/Ni ratio in the coatings was controlled by sputtering the composite targets. The composition, microstructure, and mechanical properties of the...

Molybdenum disulfide (MoS2) is a well-known solid lubricant for tribosystems running in vacuum or dry gases. Problems arise due to its sensitivity to humidity, which is a drawback for its application under ambient conditions. However, by using a physical vapor deposition (PVD) process, deposition parameters can be optimized not only to gain a coatings structure with favorable frictional propert...