recently, scientists developed the seismic rehabilitation of structures and their points of view were changed from strength to the performance of structures. nonlinear static procedure (nsp) or pushover analysis is a new method that is chosen for its speed and simplicity in calculations. “seismic rehabilitation code” & fema356 considered this method. result of this analysis is a target displace...

As more and more emphasis is being laid on non-linear analysis of RC framed structures subjected to earthquake excitation, the research and development on both non-linear static (pushover) analysis as well as nonlinear dynamic (time history)analysis is in the forefront. Due to prohibitive computational time and efforts required to perform a complete nonlinear dynamic analysis, researchers and d...

This paper presents a simple method to calculate pushover curves for asymmetric structure with displacement-dependent passive energy dissipation devices (DDPEDDs). The method analyzes the deformation of a symmetric structure in translation and in torsion. These results are then combined in order to calculate the pushover curve for an asymmetric structure with DDPEDDs. The numerical results obta...

This paper proposes a simplified analytical model for seismic response prediction of concentrically braced frames. In the proposed approach, a multistory frame model is reduced to an equivalent shear-building one by performing a static pushover analysis. The conventional shear-building model has been improved by introducing supplementary springs to account for flexural displacements in addition...

the nonlinear static procedures (nsps) proposed by design codes do not lead to reliable results especially for tall buildings. they generally provide inconsistent estimates of inelastic seismic demands, especially for the top floors due to their inabilities in considering the higher modes effects. in this paper, a new enhanced pushover procedure is proposed which is based on the envelope of the...

In recent years, nonlinear calculation methods can be easily carried out by means of developing computer technologies. In this way, comparisons of the nonlinear methods have started to increase rapidly and more studies are carried out on regular and irregular buildings. However, it is most important to compare consistency of the methods on buildings. In this study, most common nonlinear static ...

The nonlinear static procedure (NSP) or pushover analysis in FEMA-273 [FEMA, 1997] has become a standard procedure in current structural engineering practice. Seismic demands are computed by nonlinear static analysis of the structure, which is subjected to monotonically increasing lateral forces with an invariant height-wise distribution until a target displacement is reached. None of the curre...

Pile foundations have been the subject of interest for earthquake engineers since last several decades. The devastations caused in major earthquakes of the world can be the reason enough to carry out the research on the topic of seismic behavior of piles. One definite concern is liquefaction induced ground movement after the shaking in an earthquake, causing extra lateral loads acting on piles....

the proposal lateral load pattern for pushover analysis is given in two forms for symmetric concrete buildings: 1-(x/h)0.5 for low-rise and mid-rise buildings, 2- sin(πx/h) for high-rise buildings. these two forms give more realistic results as compared to conventional load patterns such as triangular and uniform load patterns. the assumed buildings of 4, 8, 12, 16, 20 and 30 story concrete bui...

the nonlinear static pushover analysis technique is mostly used in the performance-based design of structures and it is favored over nonlinear response history analysis. however, the pushover analysis with fema load distributions losses its accuracy in estimating seismic responses of long period structures when higher mode effects are important. some procedures have been offered to consider thi...