The densification response of aluminium powder reinforced with nanometric SiC particles (50 nm) during uniaxial compaction was studied. To determine the effect of SiC nanoparticles on the compressibility of the matrix, monolithic Al powder was also examined. The effect of SiC nanoparticles on the densification mechanisms, i.e. particle rearrangement and plastic deformation, was analysed using m...

Warm compaction takes advantage of temperature to favor densification during compaction. However, this technique requires powder mixes with specific physical characteristics to be adequately processed in the temperature range involved in warm pressing. The mix formulation, especially the lubricant/binder system, should provide good flowability and compressibility and lubrication of the die wall...

The physical and mechanical properties of samples of a nickel-base alloy fabricated by powder metallurgy were determined. The particle sizes of the powders used to make the samples varied from -80/ +200 mesh to -325 mesh. The compaction pressure varied from 138 to 414 MN/m2 and the sintering temperature varied from 1150 to 1250 degrees C. The shrinkage during processing, the porosity, tensile s...

Data regarding bulk polycrystalline nickel samples obtained by powder metallurgy using Spark Plasma Sintering (SPS) are presented, with a special emphasis on the influence of a cold isostatic pre-compaction on the resulting morphologies and subsequent mechanical properties. Three types of initial powders are used, nanometric powders, micrometric powders and a mixture of the formers. For each ty...

In Powder Metallurgy the knowledge of the mechanisms governing the deformation behaviour of the material during its processing is in an initial stage due to the lack of an elasto-plastic model that could explain the mechanical behaviour, specially when the initial stage of powder die compaction is the one to be considered. For this reason geological models such as Cam-clay and Cap [1, 2, 3, 4] ...

A new friction powder compaction (FPC) process is introduced for compacting commercially pure titanium powder. The FPC process is very simple and energy-efficient since it requires only a rotating tool plunged into an aluminum plate with a hole filled with titanium powder, and no external heat source is necessary. The sintering of the powder is mainly achieved by the friction heat and pressing ...

This article presents an experimental study of the effects of raised ambient temperature in dies and punches on the compaction of pharmaceutical powders. The experiments use an instrumented hydraulic press having a temperature-controlled enclosure allowing the ambient temperature of die and punch to be varied from 20 to 57 8C. A pharmaceutical powder was compacted at temperatures in this range ...

We quantitatively studied the advantages of improving the compaction of a powder waste by several techniques, including its pelletization. The goal is increasing the mass storage capacity in a given storage volume, and reducing the permeability of air and moisture, that may trigger exothermic spontaneous reactions in organic waste, particularly as powders. The study is based on dried sludges fr...

In this paper, we present a modified density-dependent Drucker-Prager Cap (DPC) model with a nonlinear elasticity law developed to describe the compaction behavior of pharmaceutical powders. The model is implemented in ABAQUS with a user subroutine. Using microcrystalline cellulose (MCC) Avicel PH101 as an example, the modified DPC model is calibrated and used for finite element simulations of ...