The purpose of this research is to study the effect of Fe concentration as a trace metal on the quality and quantity of biogas produced from the fermentation of palm oil mill effluent (POME). Raw POME as feed was obtained from one of the palm oil mills belong to PTPN IV, other materials used were hydrochloric acid, sodium bicarbonate, and trace metals. Observed variables were volume of biogas, ...

Palm oil processing operation is invariably accompanied by palm oil mill effluent (POME) considered to be an environmental pollutant. While anaerobic digestion and the present tertiary treatment technologies of POME are able to meet the current regulatory effluent discharge requirement of biological oxygen demand (BOD) 100 mg litre – the current limit set by the Department of Environment (DOE) ...

A method for the aerobic treatment of palm oil mill effluent (POME) was investigated in shake-flask experiments using a consortium developed from POME compost. POME was initially centrifuged at 4,000 g for 15 min and the supernatant was enriched with (NH4)2SO4 (0.5%) and yeast extract (0.25%) to boost its nitrogen content. At optimum pH (pH 4) and temperature (40°C) conditions, the chemical oxy...

The comparative hypocholesteremic effect of feeding palm oil and palm oil mill effluent (POME) was investigated in male albino rats. Diets were prepared and designed to contain 50% of energy as carbohydrate, 35% as fat, and 15% as protein. Groups of six rats were each fed one of these diets, while a group was fed pelletized mouse chow which served as the control. Feeding on palm oil and POME le...

An up-flow anaerobic sludge fixed film (UASFF) bioreactor was used to treat the pretreated palm oil mill effluent (POME). In physical pretreatment, POME was pre-settled for 2 h and the supernatant was fed into the reactor. In chemical pretreatment, optimum dosages of cationic and anionic polymers were used. Experiments of pretreated POME digestion were conducted based on a central composite fac...

Several technologies are being applied for treatment of palm oil mill wastes. Among them, the biological treatments (vermicomposting) have widely been recognized as one of the most efficient and eco-friendly methods for converting organic waste materials into valuable products. The present study focuses on vermicomposting of acidic palm oil mill effluent (POME) mixed with the palm pressed fibre...

Large volumes of untreated palm oil mill effluent (POME) pose threat to aquatic environment due to the presence of very high organic content. The present investigation involved two pilot-scale anaerobic expanded granular sludge bed (EGSB) reactors, continuously operated for 1 year to treat POME. Setting HRT at 9.8 d, the anaerobic EGSB reactors reduced COD from 71179 mg/L to 12341 mg/L and recy...

This study is aimed to evaluate the electricity generation from microbial fuel cell (MFC) and to analyze the microbial community structure of city wastewater and anaerobic sludge to enhance the MFC performance. MFCs, enriched with palm oil mill effluent (POME) were employed to harvest electricity by innoculating of Klebsiella oxytoca, collected from city wastewater and other microbes from anaer...

The rising global demand for palm oil and its associated products has led to increased numbers of palm oil refineries with its attendant effluent discharge. Many researches have confirmed the ecological disruptive potentiality of Palm Oil Mill Effluent (POME), still further attention has to be directed at POME’s potential genotoxicity. The present study has made physico-chemical and genotoxicit...

Producing crude palm oil (CPO) will have side effect on producing palm oil mill effluent (POME).  Besides of high COD /BOD contents, POME still contains high amount of nutrients (nitrogen, phosphor and mineral). Traditional treatment of palm oil mill effluent using facultative anaerobic method not fully eliminated COD and BOD into allowable limit. The objective of this research was to utilize p...