Fins are protrusions on a heat transfer surface to augment heat transfer rate from it. The increase in area exposed to convection in case of finned surfaces results in increased heat transfer rate. In this study heat transfer characteristics of a pin fin with perforation is numerically analyzed. A pin fin is fabricated and experiments are done under forced convection conditions. The experimenta...

Ab = heat-sink-base surface area Ac = cross-sectional area of the fin Cp = specific heat of the air EI = Elenbaas number g = gravity H = fin height h = heat transfer coefficient around fin ka = thermal conductivity of the air kh = thermal conductivity of the heat sink L = fin length N = total number of fins of the heat sink P = plate-air parameter Pe = perimeter of the fin pf = fin pitch qb = h...

This study presents the numerical simulation of optimum pin-fin heat sink with air impinging cooling by using Taguchi method. 9 L ( 4 3 ) orthogonal array is selected as a plan for the four design-parameters with three levels. The governing equations are discretized by using the control-volume-based-finite-difference method with a power-law scheme on the non-uniform staggered grid. We solved th...

0017-9310/$ see front matter 2009 Elsevier Ltd. A doi:10.1016/j.ijheatmasstransfer.2009.03.069 * Corresponding author. Tel.: +1 518 276 2843; fax E-mail address: JenseM@rpi.edu (M.K. Jensen). A multi-objective thermal design optimization and comparative study of electronics cooling technologies is presented. The cooling technologies considered are: continuous parallel micro-channel heat sinks, ...

Title of Dissertation: CHARACTERIZATION, MODELING, AND OPTIMIZATION OF POLYMER COMPOSITE PIN FINS Raj Bahadur, Doctor of Philosophy, 2005 Directed By: Professor, Avram Bar-Cohen, Mechanical Engineering Increasing electronic product manufacturing volumes and cooling requirements necessitate the use of new materials and innovative techniques to meet the thermal management challenges and to contri...

In heat sinks, the flow within the core exhibits separation and hence does not lend itself to simple analytical boundary layer or duct flow analysis of the wall friction. In this paper, we present some findings from an experimental and numerical study aimed to obtain physical insight into the influence of the presence of the shield and its position on the hydraulic and thermal performance of sq...

The computational fluid dynamics is concentrated on the forced air cooling of the CPU using a heat sink. This paper utilizes CFD to identify a cooling solution for a desktop computer, which uses an 80 W CPU maximum whereas this number will be increased in the range of 70-120W in the forthcoming desktop computer systems. The design is able to cool the chassis with one fan with air blowing over h...