This study investigated the impacts of two best management practices (BMPs) recommended by US Environmental Protection Agency on Pb weathering and leachability in shooting range soils. The two BMPs included replacing soil berm with sand berm and periodically removing bullets or shot from a berm. A column experiment corresponding to the first BMP was conducted by mixing the bullets with sand/soi...

This study investigated the feasibility of Date-palm) Phoenix dactylifera (Leaf Ash (DLA) (an inexpensive agricultural-byproduct) as an application to adsorb Pb(II) ions. An adsorption process was carried out to evaluate initial concentration Pb(II) ions, adsorbent dose, contact time, pH and temperature on the systematic removal of Pb(II). The effects were examined and results showed that remov...

Corn straw- and municipal sludge-derived biochars (CS-BC and MS-BC, respectively) were used to remove Pb(II) from aqueous solutions. Despite being pyrolysed at the same temperature (723 K), MS-BC showed higher porosity and hydrophobicity than CS-BC. The optimum biochar loading and pH values allowing efficient Pb(II) removal (greater than 80%) were 0.2 g l-1 and 7.0, respectively. The presence o...

Nanocomposite of polyaniline (PAn) containing nanometre size Sb2O3 was prepared in aqueous media in situ chemical oxidative polymerization method at room temperature in the presence of hydroxypropylcellulose (HPC) as a surfactant. The ability of product to removal of lead ions from aqueous solution was studied. The chemical structure and morphology were studied by fourier transform infrared (FT...

Rice husk a very low cost material has been utilized as adsorbent for the removal of lead from industrial effluents. Adsorption studies have been carried out at 28°Cand the effect of initial lead concentrations (100-1000) mg/l, adsorbent dosage (0.05-1) g, pH (2-10) and contact time (10-180) min on lead uptake to establish a mathematical model description percentage removal of Pb (II). The infl...

In this study, the removal of Pb(II) from aqueous solutions by tassel powder was studied and optimised. Batch experiments were conducted on simulated solutions using tassel powder adsorbent and the effects of contact time, pH and concentration on the extent of Pb (II) removal was studied. Equilibrium and kinetic models for Pb(II) sorption were developed by considering the effect of contact time...

The aim of this study is to investigate the use of keratin colloidal solution, which was obtained from wool, for the removal of Pb(II) from water. The addition of keratin colloidal solution (15 g L(-1), 0.30 mL) to a Pb(II) solution (1.0 mM, 0.90 mL, pH 5.0) resulted in the formation and precipitation of a Pb-keratin aggregate. Measurement of the Pb(II) and protein concentrations in the superna...

Reduced graphene oxide-supported nanoscale zero-valent iron (nZVI/rGO) composites were prepared by chemical deposition method and were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman spectroscopy, N₂-sorption and X-ray photoelectron spectroscopy (XPS). Operating parameters for the removal process of Pb(II) ions, such as temperature (20-40 °C), pH (3-5), initi...

Polypores (woody pore fungi) biomass has been used as an biosorbent for the removal of Pb(II) and Cd(II) from aqueous solution under batch equilibrium experimental conditions. The resulting biosorbent is characterized by SEM and FTIR techniques. The effect of experimental parameters, such as solution pH, biomass dosage, contact time, initial metal ion concentration and temperature of Pb(II) and...