Deterioration models are important and essential part of any Pavement Management System (PMS). These models are used to predict future pavement situation based on existence condition, parameters causing deterioration and implications of various maintenance and rehabilitation policies on pavement. The majority of these models are based on roughness which is one of the most important indices in p...

The use of falling weight deflectometer—based backcalculation techniques to determine pavement layer moduli is a cost-effective and widely used method for the structural evaluation of an existing pavement. The nonlinear stress-sensitive response of pavement geomaterials has been well established, and mechanisticbased pavement design can be improved by inclusion of these nonlinear material prope...

Three dimensioned finite element analysis were conducted on concrete block paving. In order to verify the calculated results, an experimental case study was analyzed. Good agreement was observed between the measured and the calculated results. Based on the finite element analysis results and available failure models, comprehensive design charts were developed for port and industrial pavement wh...

Recently developed Mechanistic-Empirical Pavement Design Guide (MEPDG) determines the probable total rutting by summing up the deformations of all layers of the trial pavement. If all distresses outcomes including rutting are within the specification the trial section is designed for construction. Therefore, vertical deformation (or strain) needs to be measured to validate the MEPDG for local c...

The performance models used in the Mechanistic-Empirical Pavement Design Guide (MEPDG) are nationally calibrated with design inputs and performance data obtained primarily from the national Long-Term Pavement Performance database. It is necessary to verify and calibrate MEPDG performance models for local highway agencies' implementation by taking into account local materials, traffic informatio...

one of the methods for the improvement of soil against the tensile stresses is using the artificial supplements in soil such as metal belts or nets, polymer materials and natural fibers. technically this method is called the reinforced of soil.  when a pavement is located on soft soil, great deformations can occur as a result of the crossing of traffic load in superstructure layers of the body....

Highways and in particular their pavements are the fundamental components of the road network. They require continuous maintenance since they deteriorate due to changing traffic and environmental conditions. Monitoring methods and efficient pavement management systems are needed for optimizing maintenance operations. Pavement performance prediction models are useful tools for determining the op...

Through the analysis and summary of research status and development trends of deck pavement technology of long-span continuous rigid frame bridge deck pavement at home and abroad, the impact factors of durability of continuous rigid frame bridge deck pavement, such as design flaw, constructional quality and overload are studied. This article will comprehensively analyze the cause of disease foc...

The coupling effect between tire and pavement is an intensively researched subject to analyse the dynamic interaction of the vehicle-pavement system. By considering the 11.00 R20 tire and expressway asphalt pavement, ABAQUS software was employed in this study to establish an improved model for simulating the coupling effect, in which the tire rubber was taken as a neoHookean material and the pa...