Glassy samples with a composition of 40P2O5&ndash;30V2O5&ndash;(30-x)Li2O&ndash; xK2O, 0<x<30 (mol %) were prepared by the conventional melt quenching technique in two forms of bulk and blown film. X-ray diffraction patterns corroborated the amorphous feature of the samples. Density of samples was investigated by using Archimedes principle. Based on absorption and reflection spectra, indirect a...

surface roughness is a significant parameter which determines the efficiency of optical components. surface damages induced by grinding strongly influence the mechanical strength and optical quality of optical glasses. it is meaningful to rapid evaluate the surface roughness through the measurement of different grinding parameters. in this study, a cup diamond wheel (d64) is used in grinding pr...

In order to attain glasses with ultra dispersions properties, different heavy metal oxides were used. The desired glasses were obtained from the addition of high amounts of PbO and Bi2O3 to B2O3 based glasses. Refractive index measurements were carried out accurately at different wavelengths by the minimum angle of deviation in prisms method employing a spectrometer. Results indicated that, as ...

We have synthesized a series of chalcogenide glasses from the As-S-Se system that is designed to have strong nonlinearities. Measurements reveal that many of these glasses offer optical Kerr nonlinearities greater than 400 times that of fused silica at 1.25 and 1.55mum and figures of merit for all-optical switching greater than 5 at 1.55mum .

Conventional material removal of BK7 optical glass will normally result in brittle fracture at the surface, generating severe subsurface damage and poor surface finish. Subsurface damages induced by grinding strongly influence the mechanical strength and optical quality of optical glasses. However, through ductile mode grinding it is possible to reduce the surface and subsurface cracks. It is m...

The oxidation state of chromium in glasses melted in an air atmosphere with and without refining agents was investigated by Cr K-edge X-ray Absorption Near-Edge Structure (XANES) and optical absorption spectroscopy. A good agreement in the relative proportion of Cr(III) and Cr(VI) is obtained between both methods. We show that the chemical dependence of the absorption coefficient of Cr(III) is ...

We have shown that the broadband near-IR (NIR) fluorescence recently discovered in Bi-doped glasses is not specific due solely to Bi ions. Glasses doped with different 6p (Bi, Pb) and 5p (Sn, Sb) ions exhibit very similar behavior characterized by four major spectral peaks observed in two-dimensional excitation-emission plots and the lifetime of metastable level of about 400 micros. Our results...

Criteria for experimental observation of multi-dimensional optical solitons in media with saturable refractive nonlinearities are developed. The criteria are applied to actual material parameters (characterizing the cubic self-focusing and quintic self-defocusing nonlinearities, two-photon loss, and optical-damage threshold) for various glasses. This way, we identify operation windows for solit...