The direct catalytic cracking of biomass pyrolysis vapor into aromatics derived from Douglas fir sawdust pellets was tested using an upfront microwave pyrolysis process coupled with a packed-bed catalysis process using a ZSM-5 Zeolite catalyst. A central composite experimental design (CCD) was used to optimize the bio-oil and syngas yields. The effects of temperature and inverse weight hourly s...

The paper deals with the corrosion behavior of stainless steels as candidate materials for biofuel production plants by liquefaction process of the sorted organic fraction of municipal solid waste. Corrosion tests were carried out on AISI 316L and AISI 304L stainless steels at 250 °C in a batch reactor during conversion of raw material to bio-oil (biofuel precursor), by exposing specimens eithe...

The kinetics of palm oil catalytic cracking over aluminum containing mesoporous silica Al-MCM-41 (5% Al) was investigated in a batch autoclave reactor at the temperatures range of 573 – 673 K. The catalyst was prepared by using sol-gel technique and has been characterized by nitrogen adsorption and x-ray diffraction methods. Surface area of 1276 m/g with average pore diameter of 2.54 nm and por...

At the age of 3.5 years, wild chimpanzees at Bossou, Guinea, begin to use hammer and anvil stones to crack oil-palm nuts to get the kernels. To clarify the developmental processes, the authors did a field experiment in which stones and oil-palm nuts were provided. Infant chimpanzees' stone-nut manipulation was observed and video recorded. Data were collected from 3 infants younger than 4 years ...

This research work targets on the effective utilization of WTO (waste transformer oil) in a diesel engine and thereby, reducing the environmental problems caused by its disposal into open land. The novelty of the work lies in adoption of catalytic cracking process to chemically treat WTO, wherein waste fly ash has been considered as a catalyst for the first time. Interestingly, both the oil and...

The presence of polycyclic aromatic hydrocarbons (PAH) in the oil obtained at pyrolysis of Jordan oil shale in a fluidised-bed reactor in the atmosphere of nitrogen and nitrogen/steam has been investigated. The final pyrolysis temperature was 520 °C, at which the maximum oil yield was established. The derived oils were fractionated into chemical classes using mini-column liquid chromatography f...

Studies on the durability and dimensional stability of a series of hardwoods and softwoods after thermal modification in vegetable oils and in steam atmospheres have been performed. Mass loss after exposure to Coniophora puteana (BAM Ebw.15) for 16 weeks was very low for European birch, European aspen, Norway spruce, and Scots pine thermally modified in a linseed oil product with preservative (...

Worldwide energy crisis forced the researchers to explore for new and alternate sources of energy. For the developing countries this problems are acute. Generation of any kind of waste is a problem to the environment. Some wastes have the characteristics of producing energy by different thermochemical conversion. In the present work, waste tires were pyrolysed in a fixed bed reactor. The influe...

Sunlight heats the greenhouse air temperature and tomato cracking decreases marketable product up to 90%. A shade screen reduced incoming radiation during warm and sunny conditions to reduce tomato cracking. A fuzzy controller managed greenhouse irrigation to reduce tomato cracking using as variables solar radiation and substrate temperature. The embedded controller presented 9 rules and three ...

Petroleum refineries utilize thermal cracking, catalytic cracking and hydrogenation processes to produce high quality oil products. Hydrodesulfurization is one of the most important methods to remove sulfur from petroleum fractions. Heavy oil contains various types of sulfur compound. The structure of the sulfur compounds affects the ease of sulfur removal1). Acyclic sulfur compounds including ...